burntkat's latest activity
-
BWell if you look at both the neutral and the negative reviews it seems like variable weld quality and fitment are an issue on bout 1 in...
-
BIMO, the only problem with aluminum would be the quality of the welds, and since this is apparently "Hecho in China", they are also...
-
Bburntkat replied to the thread Driving without front drive shaft.I may be mistaken.
-
Bburntkat reacted to Johnny O's post in the thread Berrymans B-12 Chemtool fuel injector cleaner- destroyed engine? with
Like.
Yep. Barryman's is hard cor e stuff. -
Bburntkat reacted to derekj's post in the thread Berrymans B-12 Chemtool fuel injector cleaner- destroyed engine? with Like.
Speaking from experience and looking at your codes my guess would be your purge valve is probably sticking open - when you fill the tank...
-
Bburntkat reacted to John P.'s post in the thread Engine overheating, losing coolant, not pulling from expansion tank with Like.
The special tool is to hold the camshaft in place when you remove or install the sprocket. It is nice to have the tool. However that...
-
Bburntkat reacted to CheddarGau's post in the thread Engine overheating, losing coolant, not pulling from expansion tank with Like.
Did you end up fixing it? It's not a hard job to do on your own if you are mechanically inclined.
-
Bburntkat reacted to sota's post in the thread Engine overheating, losing coolant, not pulling from expansion tank with Like.
you know, at 212k, you might just consider an engine out service. if you're doing 1 head, you should probably do the other as well...
-
Bburntkat reacted to Aeroscott's post in the thread Engine overheating, losing coolant, not pulling from expansion tank with Like.
your going to need the timing chain holder tool if you are going to pull the heads, I don't think its real expensive but it is an...
-
Bburntkat reacted to Lostintheforest's post in the thread Engine overheating, losing coolant, not pulling from expansion tank with Like.
I put new shocks and struts all the way around on mine at about that point too. New tires probably 5,000 miles ago also. Oh, and rust...
-
Bburntkat reacted to Jack2282's post in the thread Engine overheating, losing coolant, not pulling from expansion tank with Like.
anyone test for failed head gasket and actually find one? if so what tests did you run and what did they show-this is very important for...
-
Bburntkat replied to the thread Aluminum Coolant Overflow Tank.If you're replacing the coolant overflow tank, do yourself a favor and use the Dorman part. PN is in my history
-
BWhere are they made? Are they a direct fit replacement ? Could be really nice but IMO it all depends on the quality of the welds and...
-
BGot a link? I've never seen or heard of such a thing?
-
Bburntkat replied to the thread Driving without front drive shaft.Length isn't the difference, IIRC. The joint at TC is. I have PNs if you need them. Do yourself a favor. Only use Spicer parts, Dorman...
