DadOSix's latest activity
-
DadOSix replied to the thread 3-5 inch lift.The forum search is not nearly as sharp as going ‘site:jeepkj.com max lift’ -
DadOSix replied to the thread 3-5 inch lift.Post in thread 'where did the lift FAQ go' https://www.jeepkj.com/threads/where-did-the-lift-faq-go.46869/post-517389
-
DadOSix replied to the thread Crank but no start Cherokee Sport 2.4 2002... *Update: This has been solved, it was a broken Cam Belt (I won't be trusting AA diagnosis again).Graham - Are you seeing any signal at the fuel injectors? I’m not familiar with the 2.4, just thinking along. Anywhere you see a 5...
-
DadOSix reacted to mrt100171's post in the thread Rear Lower Control Arm Replacement, Lessons. with
Like.
I know there have been others who have had to replace their Lower Control Arms, and have their own experiences. I thought I would share... -
I just got my delete kit from WWDIESEL what a good product fit perfect and ez to install. If you ever have a viscous heater problem I...
-
You’ll have to get to it by taking off the inner door panel inside the car. Do this with the window up or you will not be able to access...
-
DadOSix replied to the thread 2007 Jeep Liberty PCM/ECM Vendors.Cool! Let’s get a fuel pressure gage on this jeep and see what you have. Low FP will cause stalling and unfortunately sometimes fuel...
-
DadOSix replied to the thread 2007 Jeep Liberty PCM/ECM Vendors.Pat - How about some detail as to why you are led to replace the PCM? Always curious, as once I spent 400 or so on a computer for a...
-
DadOSix replied to the thread P1411 obd code my fuel gauge will not work. I checked wiring harness from tank to rear left side seat all wires are good. Checked sending unit ..Welcome! Perhaps a bit more detail and a whole ton of patience may serve you better. Posting on the forum near midnite and waiting a...
-
thanks man ill go hunting
-
DadOSix reacted to Bigbillyboy's post in the thread 3.7 idle and stalling issue. Yes. Another one… with Like.
This seems to have fixed the above problem as it has been over 2 weeks with none of any of the indications returning: In my case, it...
-
DadOSix replied to the thread Squeak sound after rebuild.Maybe try a mechanic’s. Stethoscope along the valve cover on each cylinder and see if you can isolate the noise to a single cylinder...
-
DadOSix replied to the thread My rocky road lift experience.Tom's preferred list is on here many times over, and may even be a sticky post somewhere. He has not been active for some time now...
-
DadOSix replied to the thread Vista heater delete kit.Post in thread '2005 jeep liberty pump' https://www.jeepkj.com/threads/2005-jeep-liberty-pump.80825/post-812110
-
Thankyou for your valuable info!
