DadOSix's latest activity
-
DadOSix replied to the thread Need help ASAP.Let’s back up and learn why you did a relearn in the first place…. You have so many threads going it is hard to follow. It was a... -
DadOSix reacted to DavidG91's post in the thread How To: Change front driveshaft / change a driveshaft head with
Like.
Success. Replacing the old front driveshaft with the torn TC boot and loud howl is done and there's no noise in 4wd mode. I did use the... -
DadOSix replied to the thread How To: Change front driveshaft / change a driveshaft head.If that boot is ripped up, the joint is bad. Usually, it is the tc end and not the front one, but when I do mine, both get changed. I...
-
DadOSix reacted to belvedere's post in the thread Seized upper control arm bolt. Attempt to remove it myself, or admit defeat and take it to a garage? with Like.
Since only the tip of the blade was being used (because of access), I took the dull end off with my bench grinder and got more life out...
-
DadOSix replied to the thread How To: Change front driveshaft / change a driveshaft head.Those suffixes. Aa ab ac. If the main part number matches you are good to go. The 'a' suffixes are minor updates.
-
DadOSix reacted to DavidG91's post in the thread How To: Change front driveshaft / change a driveshaft head with Like.
Great thread. Thanks all. I am getting a very loud grinding noise when moving 4wd even at slow speeds and in a straight line. It sure...
-
DadOSix replied to the thread 2016 Liberty Radio Replacement.sweet! That does not look to bad to do at all!
-
DadOSix reacted to lfhoward's post in the thread Rebuilding JBA Adjust a Struts - part numbers with Like.
There’s a pic of the rear springs in a box in one of the previous posts I made here on page 2. ^^^ In terms of cost, plan on about...
-
DadOSix reacted to JJam2112's post in the thread Rebuilding JBA Adjust a Struts - part numbers with Like.
looking at sending in my JBA coilovers for rebuild. Did you send them in like this to them , or did you remove the shock and only send...
-
DadOSix reacted to KJowner's post in the thread No low beams, gages, tail lights, EVIC, dome lights not working with Like.
Start with what you touched, I'm guessing a connector has pushed back or popped off.
