duderz7's latest activity

  • duderz7
    duderz7 replied to the thread What did you do to your jeep today?.
    A rubber wedge shaped door stopper is my go to
  • duderz7
    duderz7 replied to the thread lockers.
    The damage usually happens when you get a front wheel off the ground spinning at high rpm and then suddenly coming down and getting...
  • duderz7
    duderz7 replied to the thread Jeep kj 2005 front diff leak and noise.
    Glad to hear there's no metal in there. Yes the plastic can be replaced with the needle bearing.
  • duderz7
    duderz7 replied to the thread Jeep kj 2005 front diff leak and noise.
    If your Jeep is 2005 or later the "bearing" is actually more of a plastic bushing. It can be replaced with the needle bearing that comes...
  • duderz7
    duderz7 replied to the thread Jeep kj 2005 front diff leak and noise.
    Pictures might help us help you as some of your terminology seems a bit off.
  • duderz7
    duderz7 replied to the thread lockers.
    Shankster has some good pointers. Rack bushings and engine mounts were both replaced when I had my diff out. They were super easy to get to.
    • 20221107_162717.jpg
  • duderz7
    duderz7 reacted to Shankster's post in the thread lockers with Like Like.
    Sounds like you're well set up for the project then - have fun! Back to those setup bearings for the front diff, I was able to finds...
  • duderz7
    duderz7 reacted to DadOSix's post in the thread Help plz with Like Like.
    You should be gold - 05 and up use the same lower end stuff - early issues with reluctor wheel on the crank and various sensors. Make...
  • duderz7
    duderz7 reacted to Rokk's post in the thread lockers with Like Like.
    I’m gonna reveal some information that will seriously set some of you off, but try not to lose it ok? I have a kk, but I think the same...
  • duderz7
    duderz7 replied to the thread lockers.
    I agree with the above, I have the Spartan helical up front and rebuilt the stock trackloc when I regeared a bit ago. I've found that...
  • duderz7
    duderz7 reacted to Shankster's post in the thread lockers with Like Like.
    Just to be clear, the "Spartan Helical" is not a locker, it's a mechanical type (as opposed to a clutch type) limited slip differential...
  • duderz7
    duderz7 replied to the thread lockers.
    If ring gear fits the carrier then I don't see why not.
  • duderz7
    duderz7 replied to the thread lockers.
    The gears are certainly not interchangeable, but the diff carrier is. Just ask the Spartan helical diff that was built with the standard...
  • duderz7
    duderz7 reacted to Leeann's post in the thread What did you do to your jeep today? with Like Like.
    MAPP gas and yes
  • duderz7
    duderz7 replied to the thread lockers.
    As long as whatever you choose also fits 4.10 you should be good. I'm running a "Spartan helical" some say it won't fit, but I've been...
Show older items

Random media

off road 004
before lifting
alpine ics-x8
Trailer4
hound
image
image need to paint and make mounts for tank strapes
DSC02981
5/20/09 4 KC HiLite 100w Daylighter Spots

Latest posts

Members online

Total: 409 (members: 1, guests: 408)
Top