ikuo78's latest activity
-
ikuo78 replied to the thread Do I have the parts correct for my lift kit and what is the difference between front and rear height.That's a good plan. Leveling depends on the weight of the equipment, so you won't know until you lift it. If the front is higher than... -
ikuo78 replied to the thread Do I have the parts correct for my lift kit and what is the difference between front and rear height.I feel that 790 is too stiff for vehicles without a winch or steel bumper. It looks like it's going to lift about 4 inches with the...
-
Despite the weather we got in the last couple days, went out and offroaded
-
ikuo78 replied to the thread Bank 1 sensor 1 wiring 2007 Liberty Sport.Excerpt from the 2003 service manual.
-
-
ikuo78 reacted to jamesbeat's post in the thread Had a relatively minor collision. Passenger side front wheel now has negative camber and toe-out. Trying to figure out what part (or parts) got bent. with
Like.
Just an update on this in case it helps someone in the future: The problem was a bent steering knuckle. If you research this online... -
You will loose a bit of ground clearance and rev more for the same speed, but if that doesn't bother you I don't see why it would be a...
-
You should recalibrate the speedometer for the different tire size with DRBIII. Correcting/Recalibrating the Jeep Liberty Speedometer...
-
ikuo78 replied to the thread Project to divert KK coil to KJ.The rear shocks arrived and I installed them. Without removing the tires, Without jacking, Crawling under the car, It was frustrating to...
-
-
Got rid of some plastic on the front end, as I got tired of tires scraping the plastic (and can't afford a better front lift kit). I...
-
I don't know if anyone else will ever need this, but I was this days old when I discovered something really important and useful for...
-
ikuo78 reacted to One from the north's post in the thread What did you do to your jeep today? with Like.
Went to change one of the rear indicator bulbs. Naturally it went out day after I had the car serviced... I would never have dared to...
-
Cleaned airbox sensors and replaced boost/MAP sensor. Hello all, new to this group and also new to a diesel liberty. Just acquired a...
-
ikuo78 reacted to CherokeeLiberty's post in the thread What did you do to your jeep today? with Like.
This was kind of a cool milestone, yesterday…
-
ikuo78 replied to the thread Misfire 2 & 6.The translation is strange. The meaning is as follows. If #6 is actually misfiring, It is very unlikely that it is due to the sliding...
-
ikuo78 replied to the thread Misfire 2 & 6.Checking fuel flow is a good idea. Certainly, if #6 is actually misfiring, there is little doubt that it is due to the sliding...
