ikuo78's latest activity
-
This automatic 2011 is my 2nd KK, former one was a 2008 stick shift. I put a 2.5" lift kit on each of them (Rough Country recently)... -
Why?? Just why?? It would have taken longer to cut the injector line and spray metal filings into the injector than to undo the nut!
-
I think you can just pull the speakers and go. I replaced mine as soon as I bought the jeep because they were rotten, everything else is...
-
So true, the port side UCA rear bolt is a PITA! You will need a long extension or pair of extensions and get at it from the battery box...
-
ikuo78 replied to the thread 2009 KK Jeep scalloped driver front tire.That's right, the steering wheel is on the right side. The TIPM and battery are on the left, so there's plenty of space on the right...
-
ikuo78 replied to the thread 2009 KK Jeep scalloped driver front tire.My KJ is RHD. I can access the nut from under the car on the driver's side without removing the steering shaft. Use a 50mm offset socket...
-
ikuo78 replied to the thread 2009 KK Jeep scalloped driver front tire.Good plan. As far as alignment is concerned, the steering rack bushings are also generally ruined. If it's installed the same way as KJ...
-
ikuo78 reacted to Hec In Omaha's post in the thread 2009 KK Jeep scalloped driver front tire with
Like.
Thanks everyone for your input. I am now planning on also replacing the following when I do the front shocks: MOOG RK622148 Front Left... -
Yes, always worth investigating the cheaper options first, wear depends how the engine has been looked after and how it's been driven...
-
Low compression could implicate the piston rings, right? But if compression isn’t low, and it isn’t leaking externally, could it be worn...
-
A compression test would be a good start.
-
ikuo78 reacted to Johnny O's post in the thread What did you do to your Jeep today? -Wrangler Edition- with Haha.
Upgraded some smart alek decals...
-
Get an alignment too. Gyro
-
ikuo78 reacted to john e denson's post in the thread 2009 KK Jeep scalloped driver front tire with Like.
YOU WILL NEED DEEP METRIC SOCKET. i THINK IT IS A 18 MM been awhile
-
The springs will be worn out, it looks like its sitting very low at the front, the new bits should sort it out.
