JeepJeepster's latest activity
-
JeepJeepster replied to the thread CJC Transmission pan.I too have installed the PML pan and am happy with it. It DOES NOT have internal cooling fins, but it does seem to lower the trans... -
-
JeepJeepster replied to the thread Can you mount factory skid plates on a Liberty that didn't come with them?.No, they are not removeable. You can buy a nutsert tool that makes quick work of installing them...
-
JeepJeepster replied to the thread Front differential crush washer/pinion nut torque 500 ft/lbs??.That cannot be correct. I installed 4.10's in my front diff and did not get anywhere near that. Pretty sure I recall torqueing to 160...
-
JeepJeepster replied to the thread Power Steering Issue.Yes, the cooler is on the return (low pressure) side.
-
JeepJeepster replied to the thread Drive wheels.You'll be stuck spinning the rear wheels in full time with chains on the front. Full time is really only useful when the roads are...
-
JeepJeepster replied to the thread Front end passenger side intermittent thumping vibration???.Mine did that many years ago and it was a worn out intermediate shaft where the CV slides on. I had to get a new shaft and a new CV...
-
JeepJeepster replied to the thread 2005 Liberty TPMS - OBD.My Autel 808S-TS does everything. Does your KJ not tell you the pressures? Does it only have a light that comes on when a tire is low...
-
JeepJeepster replied to the thread HD cooling dual fan question please.Exactly, its nice having a backup. Not many vehicles are capable of having a backup like the KJ.... Especially when its can be a...
-
JeepJeepster replied to the thread I've spun bearings on every 3.7 I've owned...4,000 rpms in Park or Neutral?
-
JeepJeepster replied to the thread HD cooling dual fan question please.Yes sir, you can just add the clutch/ fan blades... Thats exactly what I did on my 2004 and it works perfect. And thats exactly why I...
-
JeepJeepster replied to the thread Gear Pattern, Is it Good?.That sure looks perfect to me. You said you added 0.01", what did you end up taking back out to get the final pattern? You're going to...
-
JeepJeepster replied to the thread HD cooling dual fan question please.That is indeed the HD cooling shroud... BUT, thats the non-HD electric fan. Im going to throw some more odd facts in the mix, thats...
-
JeepJeepster replied to the thread I've spun bearings on every 3.7 I've owned...Talking about issues with these Jeeps now days is a moot point... My KJ and its 3.7 are 20 years old and have given me zero issues, so...
-
JeepJeepster replied to the thread HD cooling dual fan question please.His connectors have already been cut off, so that wont be an issue.
-
JeepJeepster replied to the thread HD cooling dual fan question please.You can certainly use the mechanical fan and shroud (I recommend getting a new clutch). You could certainly use the three wire fan if...
