KJowner's latest activity
-
KJowner replied to the thread New Kj from France.@Geralt gentleman from France wants to talk to you -
Sorry Boss, wanted to write to the new guy Geralt. Its a bit confusing to use to the web site sometimes. Cheers. Olivier
-
KJowner replied to the thread My 2003 KJ 2.8 CRD and its problems.That's a good call, probably the original fault that the previous owner missed!
-
KJowner replied to the thread Blend door actuator.I would check to see if there is a leak on the line to the actuator and check the controller pulls and holds a vacuum on that line when...
-
KJowner replied to the thread My 2003 KJ 2.8 CRD and its problems.Possibly your scanner is the problem, however the symptoms you are describing sound like a fault on the BUS or a module plugged into it...
-
KJowner replied to the thread Blend door actuator.Sounds like a faulty controller to me, or a big vacuum leak somewhere. I would take the controller out and investigate there first...
-
I just wanted to introduce myself! My name is Dawna. I'm neither new to Jeep nor forums but this forum and the Liberty are new to me. :)...
-
KJowner reacted to sota's post in the thread Transfer Case for manual the same as automatic? with
Like.
yes, no, and it's complicated. yes... NP231, NP241, and NP242 can be bolted up. HOWEVER... 2WD manuals have a different tail snout than... -
yea I made sure everything was already slick as snot before I installed it. on a good note, at least I got the parking brake system to...
-
yea I ain't mucking with it. RA is sending a replacement.
-
KJowner reacted to u2slow's post in the thread Need Help!! Bandaid alignment until professional one with Like.
Best you can probably do is dial the cam bolts on the lower control arms to "push" the arm outboard. It was not enough on our 2005. I...
-
KJowner replied to the thread My 2003 KJ 2.8 CRD and its problems.It looks like that to me, the codes don't make sense. I don't suppose you have the original bits?
-
The randomness of all those codes, especially the c2400 and u2200 makes me wonder if there is a wiring or connection problem with the...
-
The rear shocks arrived and I installed them. Without removing the tires, Without jacking, Crawling under the car, It was frustrating to...
