KJowner's latest activity
-
KJowner replied to the thread 06 CRD vibration when letting off the go pedal.I'd guess worn bushes letting the axle wobble when it's not pushed against them. -
KJowner replied to the thread Front end wheel resistance??.Possibly, if the boot is damaged then definitely, but don't discount the wheel bearing, the big unitary bearings can feel OK when you...
-
KJowner replied to the thread Standard flooded or AGM?.The ECU controls the voltage supplied by the alternator the same way to the Automatic Voltage Regulator on a generator controls the...
-
Thanks KJowner. I'll give it a try. I'm guessing that when I use the Fluke it's with the engine running. I think I've decided to get an...
-
My KJ is RHD. I can access the nut from under the car on the driver's side without removing the steering shaft. Use a 50mm offset socket...
-
KJowner replied to the thread 2002 KJ Fuel Rail.CRD or V6?
-
Why?? Just why?? It would have taken longer to cut the injector line and spray metal filings into the injector than to undo the nut!
-
-
Good plan. As far as alignment is concerned, the steering rack bushings are also generally ruined. If it's installed the same way as KJ...
-
KJowner replied to the thread Android head unit.Nice but I bought the whole car for a little more than they want for that!
-
KJowner replied to the thread Front end wheel resistance??.Any noise? The front propshaft CV joint is worth checking too, the small boot splits and it fills up with mud.
-
KJowner replied to the thread Front end wheel resistance??.Do the wheels feel warm after a run? What about the front diff?
-
KJowner replied to the thread Standard flooded or AGM?.A Fluke will do nicely, switch it to DC and measure the voltage at the battery terminals. I'd guess you wouldn't see much more than a...
-
-
The Ignik FireCan is the nearly perfect overlanding (I loath that term. Overlanding is just expensive car camping) solution to portable...
-
KJowner replied to the thread Starter Issue, or Not?.It powers out and spring returns. Probably needs a strip and clean
-
The only thing left is bullet #11.
