KJowner's latest activity
-
Hey thanks yall. I took the rail to a mechanic and it was disassembled, the rubber o rings replaced and then tightened back up. See... -
KJowner reacted to u2slow's post in the thread best replacement when rebuilding the suspsension with
Like.
They are cheap enough to just change in their entirety when they're shot. Not that hard to change either. I tried new bushings once... -
KJowner replied to the thread Anyone have a source for a camshaft tone wheel on a 2003 Liberty 2.4L?.Not all that common an engine in Jeeps, but I believe it was used in other cars so it might be worth investigating.
-
KJowner replied to the thread door installation 07 kj sport.Have you downloaded the manuals? www.colorado4wheel.com/manuals/Jeep/KJ/
-
KJowner replied to the thread 2012 Liberty Sport: need help with transfer case, axle and fluid specifics.I use ATF4+ In the gearbox and transfer box, EP90 in the front axle and EP140 in the rear. Both EP oils are mineral.
-
KJowner replied to the thread 2012 Liberty Sport: need help with transfer case, axle and fluid specifics.I think all the autos ran an NV242, not had anything as new as a 2012 though. Time to crawl underneath and look at the tag on the box...
-
-
KJowner replied to the thread Standard flooded or AGM?.Yes thay aren't cheap! I doubt you will have any issues with the conventional lead acid, my other two cars have them.
-
I checked the voltage at the battery terminals with the engine running. As you mentioned, there was a lot of fluttering. The lowest...
-
i will put 265 75 16 and I have only 2,5 inches spacer on my new KK HELLO FROM GREECE
-
Got some off shore led fog lamps given to me the other day - they are for a JK stock front bumper but have heard that they will work on...
-
This video gives some good insight into how much difference a rear locker can make as opposed to the big lift/tire combo. Not a huge...
-
KJowner replied to the thread 2002 KJ Fuel Rail.Yeah a scrapyard one would be a safer option.
-
KJowner replied to the thread 2009 KK Jeep scalloped driver front tire.No luck involved we just drive on the proper side of the road ;-)
-
KJowner replied to the thread 06 CRD vibration when letting off the go pedal.I'd guess worn bushes letting the axle wobble when it's not pushed against them.
-
KJowner replied to the thread Front end wheel resistance??.Possibly, if the boot is damaged then definitely, but don't discount the wheel bearing, the big unitary bearings can feel OK when you...
