KJowner's latest activity
-
KJowner reacted to Shankster's post in the thread Remove front diff without removing control arms? with
Like.
Yes, that's exactly what I did - saves a whole bunch of time and you end up with those bolts oriented the way Jeep should have done it... -
KJowner reacted to JeepJeepster's post in the thread I've spun bearings on every 3.7 I've owned.. with Like.
Talking about issues with these Jeeps now days is a moot point... My KJ and its 3.7 are 20 years old and have given me zero issues, so...
-
Here is patterns from service info. This is the front. There is a lot more info above in terms of setting it up, but this will help you...
-
Check your electric cooling fan by starting the engine and turning on the AC to full blast cold. That should kick the fan on. If the...
-
There is a fuse in the power distro center on driver side at the front the engine compartment. Check that 1st, because that's the...
-
KJowner replied to the thread Manifold Absolute Pressure Sensor Connector.I would think the hardest part would be finding the right new connectors. Might be easier to get second hand ones with a reasonable...
-
Thanks, I'm going to get an auto locksmith.
-
Thank you for checking it out for me. I thought the same thing, to shallow and then to deep. Here is where I landed with the last...
-
Installed shocks in my lunch break. Can't say how they feel just yet, but it leveled the ride out.
-
Watch if the rack moves on the bushing when you steer. That's how I diagnosed mine. The driver side usually fails first because it...
-
Download the service manual and follow the steps. It takes a bit of time for sure, but there are harder jobs out there.
-
KJowner replied to the thread H&R Spring Review.The spring is physically longer with additional coils though, so without a longer bump stop it could bottom out, as the H&R lift is...
-
Thanks for this advice MikeH. I finally put the Moog bushing on and the squeaking is gone! Like you said not a bad job to do
-
Everywhere I go … there they are! Edit: guess I should reset my mirror no need to go back to that year! :rolleyes:
-
Bought some Monroe load adjusting shocks today. Found the ome HD rear springs compress more than I would like when loaded.
