KJowner's latest activity
-
KJowner reacted to DadOSix's post in the thread 2006 liberty limited automatic transmission failed with
Like.
Just a guess, but I think you buy their ‘in the box’ reman and return yours for a core. Probably no way to tell on the replacement unit. -
KJowner reacted to Robertp's post in the thread 2006 liberty limited automatic transmission failed with Like.
I've decided to go with a reputable shop that will install a Jasper brand rebuilt 42RLE ****** w/ CR86 torque converter. Thanks to your...
-
KJowner replied to the thread 2004 jeep liberty sport 4wd.It would look silly and mess up the gearing, any reason why?
-
-
The ECU has been flashed, only the lowest tweak from DIY ECU from LOST. I have a torque converter in mind. Thanks for the warning.
-
KJowner reacted to wheeee32's post in the thread *UPDATED*Weird Front Turn Signal Shenanigans with Like.
Okay I see on 8W-52-5 and -6 of the schematic the ground for both. Looks like it might be close to the right fog light...
-
KJowner reacted to lfhoward's post in the thread *UPDATED*Weird Front Turn Signal Shenanigans with Like.
I ran into it with the left turn signal. The ground wire rusted through somewhere between the housing and the ground point behind the...
-
KJowner replied to the thread Can you mount factory skid plates on a Liberty that didn't come with them?.Stainless will eat carbon steel if you live anywhere where the roads get salted
-
KJowner reacted to Shankster's post in the thread Can you mount factory skid plates on a Liberty that didn't come with them? with Like.
On some locations you also have the option of just drilling a hole up through the top of whatever member you're attaching to and...
-
KJowner replied to the thread Turbo rebuilders?.An upgraded turbo is useless on an ECU controlled diesel without an upgraded ECU map to go with it, the standard turbo is allegedly good...
-
KJowner replied to the thread Turbo rebuilders?.Owch!
-
-
You should be able to go in your scan tool and look up the modification code and go to the Dodge or Chrysler website and see if it...
-
The ECM corresponds to 2005 crd
-
KJowner replied to the thread 12 jeep KK service 4wd, transfer case position sensor, gear ratio error.Check the wiring and plugs
-
KJowner replied to the thread Belt tensioner >> stripped@@*.* << mounting bracket.Not had an issue with springs, the bearings go but VW use the same pully so don't pay silly money for a special Jeep one. The one in the...
Members online
No members online now.