KJowner's latest activity
-
Mine dropped a valve seat at 125K but no piston damage, a common failure. I bought fully remanufactured heads from... -
Strongly agree with KJowner there... there are two types of hitches as well, take note if you have 4 bolt or 6 bolts to the frame. if...
-
Hi Tom - No longer in FL, moved back to western WV in 2024. Brought the Libby up with me and started collecting parts. Took much of your...
-
Look at those shiny new coils!!!
-
KJowner reacted to CherokeeLiberty's post in the thread What did you do to your jeep today? with
Like.
New plugs and coils are in! -
Oil change today, and topped off the radiator coolant. Mileage is 228166. I needed a break from that broken bolt in the frame that has...
-
Just ordered a magnetic induction heater! It arrived this afternoon and I’ll try it out tomorrow. This I think is maybe the best option...
-
Well, i errored. I have a LIBERTY and these were from a Patriot! So, the center hole was 67.1MM and mine was 71.5! NO fit, SO, I made a...
-
Or just some old car guy with a mill in his hobby shop. $80 cash.
-
KJowner replied to the thread Broken sway bar link bolt.With how close those lines are I'd rather weld a nut on than blast a blow lamp in there, the welder will only heat the broken stub up.
-
Beware there are different gaskets for the metal vs plastic rocker covers. Timing cover, oil pan, and various sensors can leak also. I...
-
KJowner replied to the thread Bulb keeps burning out and breaking, anyone know why?.Vibration is a killer, try an LED and make sure the holder isn't loose.
-
KJowner replied to the thread Transmission oil cooler size.It depends how much comes out of the guts of the gearbox and cooling pipework. I think a total fill from dry is something like 11 lts.
-
The H&R lift springs are a good option if you don't want to spend as much as an OME setup. Will give you 1.5" of lift.
