KJowner's latest activity
-
KJowner replied to the thread Front differential help.Weird! Are all the bolts and brackets that hold the diff in place all there? Something must have broken to let the diff move like that... -
KJowner replied to the thread Front differential help.Has the tube mount failed? It should be clamped to the subframe by 2 lugs.
-
-
-
KJowner replied to the thread lifting back to stock height..They are an odd size spring, small and close wound with a high rate, I don't know of any other spring that fit except uprated ones built...
-
KJowner replied to the thread Front differential help.Are you sure both diffs are 4.10? A mix of ratios will do nasty things. When you say axle tube do you mean the shaft or the actual...
-
Hey KJowner, thanks for all that detail – just seeing it now. A few days after my post above, I thought the better of it all, and went...
-
KJowner replied to the thread Air flow does not go out in front position.You may have knocked a hose off the back of the controller but if you look on here you will find lots of information on broken...
-
KJowner replied to the thread Need help selling a NSG370.Can't you swap the tail housing or use it with a separate transfer box? I doubt many people on here will want a 2wd box, the NSG was...
-
Bon Giorno. You have a great number of the CRDs in your country. I'll be visiting Italy after the war in Ukraine is over to collect a...
-
Yesterday I ordered the Sasquatch in tank lift pump kit with their custom made 2005 wiring harness. Its a little expensive and if I had...
-
If you jump out starter relay pins #30 & #87 and starter motor cranks the engine, then most likely you have a bad starter relay or it is...
-
Our 2006 had this happen in the parking lot of Home Depot! Got the rig home and took the cover off the steering column. Adjacent to the...
-
-
My 2006 is at 206203 now and I am only a few months from owning it for 8 years and it had less than 90k then
-
KJowner replied to the thread 2008 3.7L Questions Jeep Newbie Daughter's truck down.....!.If you do go down the full engine or service exhange heads route there are several reviews on here for companies, might be worth a look...
