LibertyTC's latest activity
-
LibertyTC replied to the thread Engine light 2004 Liberty.I'd also like to mention that short trips can make the KJ unhappy as the stock pcv valve, can become plugged up with a yellowish foam... -
-
I have a 04 Liberty 3.7 6cyl. with 75,600 miles. Got an engine light a couple of months ago---P-0128. I have since replaced the engine...
-
LibertyTC replied to the thread Engine light 2004 Liberty.This code means that the engine did not warm up to 180 degrees in 10 minutes after startup. Could be the thermostat is stuck open? Try a...
-
-
I just wanted to introduce myself! My name is Dawna. I'm neither new to Jeep nor forums but this forum and the Liberty are new to me. :)...
-
Thanks for your reply. Will fix it correctly!
-
LibertyTC replied to the thread Stop Leak question.Not good at all. No quick fix here. The leaky heater core is a big job & you don't want to breathe the misty coolant vapor. Make...
-
LibertyTC reacted to jamesbeat's post in the thread Had a relatively minor collision. Passenger side front wheel now has negative camber and toe-out. Trying to figure out what part (or parts) got bent. with
Like.
Just an update on this in case it helps someone in the future: The problem was a bent steering knuckle. If you research this online... -
Clockspring is usually at fault with a short like this.
-
So I discovered my horn doesn't work on my 2002 Jeep Liberty Limited; when I press the steering wheel or when I set the alarm. I...
-
LibertyTC replied to the thread Had a relatively minor collision. Passenger side front wheel now has negative camber and toe-out. Trying to figure out what part (or parts) got bent..Probably best to have an alignment shop inspect it closely.
-
LibertyTC replied to the thread Need help identifying these control arms so i can refurbish them and replace the ball joints..Jeepin by Al's upper ball joints information..:)
-
-
The purge solenoid "harness" (Part 52129467AC) was cracked at its connector right at the firewall. Waiting on a replacement.
-
LibertyTC replied to the thread P0404 After Replacing ERG Valve.Any description or location of the faulty hose?
-
I forgot to update this thread. I had installed an aftermarket EGR that caused the code. Swapped in a Mopar unit from an autowrecker and...
Latest posts
-
What makes a Farm Land For Sale In Goa a necessary investment?- Latest: Buylandingoa
-
-
-
-
