Georgia04kj
New Member
- Joined
- Jan 18, 2022
- Messages
- 2
- Reaction score
- 0
The plastic part of my Sunroof slider got chewed up. I had to cut it out. My question is how do you get the new slider installed on the track?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Mine broke too...well the plastic piece that lifts window up n into place. I went to pick n pull n got one. But I'm ADD n typically never finish projects, so I was too scared to actually change it. Just glad I got back into place, and sealed the edges on roof so wldnt leak. Except the lwak kept happening ...rite into my door panels. So read on here it was prob clogged drain holes on front corners of sunroof that drains down A frame and on to ground. Took me 2 years to realize it was actually the worn out window seals? That snaps into bottom of window frame where window slides up n down. Supposed to have fuzziness to keep water out. They r expensive new, so back to pick n pullThe plastic part of my Sunroof slider got chewed up. I had to cut it out. My question is how do you get the new slider installed on the track?
The doors should drain, there are holes in the inside lower, probably blocked with dirt/ rust or cavity waxMine broke too...well the plastic piece that lifts window up n into place. I went to pick n pull n got one. But I'm ADD n typically never finish projects, so I was too scared to actually change it. Just glad I got back into place, and sealed the edges on roof so wldnt leak. Except the lwak kept happening ...rite into my door panels. So read on here it was prob clogged drain holes on front corners of sunroof that drains down A frame and on to ground. Took me 2 years to realize it was actually the worn out window seals? That snaps into bottom of window frame where window slides up n down. Supposed to have fuzziness to keep water out. They r expensive new, so back to pick n pull