Transmission Dies After 1st Gear

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Trainmaster

Member
Joined
Jul 4, 2019
Messages
33
Reaction score
12
Well, that's it. The 2005's transmission finally died with 170,000 miles of city driving.

Still strong in first and reverse. As soon as it tries to shift into 2nd, it loses it all and goes to neutral. Then you have to turn off the ignition and turn it back on the get first gear again, and then only to 10 MPH. Then it pops back into neutral.

Short of a new transmission, any thoughts on fixing this failure?
 

Trainmaster

Member
Joined
Jul 4, 2019
Messages
33
Reaction score
12
The only error codes tell me that it's in the wrong gear for the speed, etc... I'll try to dig deeper into it with Jeep transmission codes, but I don't expect much.
 

lfhoward

Wheel. Repair. Repeat.
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,449
Reaction score
2,710
Location
Philadelphia, PA
This is a bummer. If it is dead, maybe you could swap in a 42RLE with fewer miles on it.

If you wouldn’t mind, would you please add your data to this thread?

 

Yetiboy01

New Member
Joined
Jun 28, 2021
Messages
22
Reaction score
10
Well, that's it. The 2005's transmission finally died with 170,000 miles of city driving.

Still strong in first and reverse. As soon as it tries to shift into 2nd, it loses it all and goes to neutral. Then you have to turn off the ignition and turn it back on the get first gear again, and then only to 10 MPH. Then it pops back into neutral.

Short of a new transmission, any thoughts on fixing this failure?
Could just be a Trany speed sensor failure telling the trany the input & output speeds dont comput, check your codes before you panic.
 

Latest posts

Members online

Top