NEED 4.56 RING AND PINION FOR MY KJ

jorgecfs · Jul 25, 2024

Hi, I have a 2006 KJ 2.8 CRD 4WD. Need to upgrade ring and pinion from 3.73 stock ones to 4.56.
I have trouble finding for the front dana 30. do you know where to find somehow cheap ring and pinions front and rear 4.56? also need to know if other jeep like XJ ring and pinion fits my kj, cause it´s much easier to find other models parts than kj. mine is Chrysler 8.25 rear and dana 30 front. also found DANA SUPER 30 ring and pinion and don´t know the difference between the regular dana 30 and this one. PLEASE HELP!!! NEW JEEP OWNER

klc · Jul 25, 2024

The front is a Dana 30A, and Libby’s are the only vehicles so equipped, which is what makes it both complicated and expensive.

jorgecfs · Jul 25, 2024

klc said:
The front is a Dana 30A, and Libby’s are the only vehicles so equipped, which is what makes it both complicated and expensive.

can you tell me the web for the best price?

duderz7 · Jul 25, 2024

Your best bet is wrecking yards. If you find a ring and pinion new you're looking at around $800 for the set, at least when I was looking a few years ago. Also 4.10 is the lowest available for the dana 30a.

lfhoward · Jul 26, 2024

duderz7 said:
Also 4.10 is the lowest available for the dana 30a.

This. The KJ front diff will not accept a 4.56 gear set. (The KK will however.)

KJowner · Jul 26, 2024

If you are in Europe them the 2.4 and 2.5 both have 4.10 diffs.

CheddarGau · Jul 29, 2024

jorgecfs said:
Hi, I have a 2006 KJ 2.8 CRD 4WD. Need to upgrade ring and pinion from 3.73 stock ones to 4.56.
I have trouble finding for the front dana 30. do you know where to find somehow cheap ring and pinions front and rear 4.56? also need to know if other jeep like XJ ring and pinion fits my kj, cause it´s much easier to find other models parts than kj. mine is Chrysler 8.25 rear and dana 30 front. also found DANA SUPER 30 ring and pinion and don´t know the difference between the regular dana 30 and this one. PLEASE HELP!!! NEW JEEP OWNER

Your diesel Liberty should already have 4.10 gearing. Search your vin and verify the exact vehicle configuration and options or contact your local dealer.

u2slow · Jul 29, 2024

I have it on good account that the North American CRD (only offered '05-06) were 3.73 ratio.

What I know of the 30A r&p is the pinion shank is fatter, i.e. larger ID (and OD) bearings. I have wondered if sleeves can be pressed onto a std D30 pinion and substituted.

I thought I read that the KK borrowed the Wrangler's r&p. Anyone confirm?

nbas · Jul 30, 2024

Max you can go is 4.10 for the KJ. You can take a used one from the 2.4L, or Spicer D30 Super 4.10 R&P, (D30KJ-410LIB-OE). I went with the first route since I had to import the Spicer from US (customs, transport expenses, etc...)

lfhoward · Jul 30, 2024

u2slow said:
I have it on good account that the North American CRD (only offered '05-06) were 3.73 ratio.

What I know of the 30A r&p is the pinion shank is fatter, i.e. larger ID (and OD) bearings. I have wondered if sleeves can be pressed onto a std D30 pinion and substituted.

I thought I read that the KK borrowed the Wrangler's r&p. Anyone confirm?

Yes the D30 case on the KK is compatible with the non-rubicon JK D30 gears. Thus a KK can run 4.10, 4.56, or even 4.88. I only heard of one guy who ran 4.88 and he said that was going way too far because he could not fit tires large enough to match.

KJowner · Jul 30, 2024

Will a KK case fit a KJ?

lfhoward · Jul 30, 2024

KJowner said:
Will a KK case fit a KJ?

I have never heard of anyone swapping a KK front differential into a KJ. It would necessitate the KK CV axles and front running gear being swapped over with it. Possibly also the engine cradle where the diff attaches… I am not sure how much of an expensive chain reaction would ensue by trying to move a KK front diff to a KJ.

u2slow · Jul 30, 2024

KJowner said:
Will a KK case fit a KJ?

Are we talking about the whole diff? Or the internal carrier 'case' that the ring gear bolts to?

The latter item may fit all kinds of Dana 30 variants. The KJ one does anyway.

KJowner · Jul 30, 2024

u2slow said:
Are we talking about the whole diff? Or the internal carrier 'case' that the ring gear bolts to?

The latter item may fit all kinds of Dana 30 variants. The KJ one does anyway.

I was just wondering if it was possible to fit the KK case to a KJ, not that I'm planning on doing it, KKs are rare here anyway, nowhere near as popular as the KJ for some reason.

CheddarGau · Jul 30, 2024

u2slow said:
I have it on good account that the North American CRD (only offered '05-06) were 3.73 ratio.

What I know of the 30A r&p is the pinion shank is fatter, i.e. larger ID (and OD) bearings. I have wondered if sleeves can be pressed onto a std D30 pinion and substituted.

I thought I read that the KK borrowed the Wrangler's r&p. Anyone confirm?

Chrysler doing Chrysler things

NEED 4.56 RING AND PINION FOR MY KJ

jorgecfs

New Member

klc

“It flies like a truck.”

jorgecfs

New Member

duderz7

Full Access Member

lfhoward

Wheel. Repair. Repeat.

KJowner

Full Access Member

CheddarGau

Full Access Member

u2slow

Full Access Member

nbas

Full Access Member

lfhoward

Wheel. Repair. Repeat.

KJowner

Full Access Member

lfhoward

Wheel. Repair. Repeat.

u2slow

Full Access Member

KJowner

Full Access Member

CheddarGau

Full Access Member

Similar threads

Random media

Latest posts

Members online