Need help identifying these control arms so i can refurbish them and replace the ball joints.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dolly95

New Member
Joined
Oct 8, 2024
Messages
1
Reaction score
0
Pulled off of an 05 liberty with a 3 inch lift. I can't seem to find a replacement ball joint and they have no markings.
You must be registered for see images attach
 

duderz7

Full Access Member
Joined
Jan 20, 2016
Messages
1,499
Reaction score
1,256
Location
Weiser, ID
Likely an earlier version of jba, send them an email to see if they can help you out. They're very customer service oriented.
 

trailpack

New Member
Joined
Aug 30, 2024
Messages
10
Reaction score
2
If all else fails, a machine shop might be able to help you out.
 

burntkat

New Member
Joined
Sep 14, 2021
Messages
25
Reaction score
10
Likely an earlier version of jba, send them an email to see if they can help you out. They're very customer service oriented.
Look like current production. They use 1-ton chevy joints
Moog K-6292
 

Shankster

Full Access Member
Joined
Nov 18, 2020
Messages
130
Reaction score
58
Location
Durango, Colorado
Look like current production. They use 1-ton chevy joints
Moog K-6292
They look just like RRO control arms too which also use the Moog K-6292 ball joint. Bottom line, you're probably safe going with Moog K-6292. If in doubt you could take one of the ball joints to your local Auto parts store and compare them alongside the Moogs if they have them in stock. My RRO arm on the passenger side was rubbing on the spring under some circumstances - I took a grinder to the protruding part of the ball joint - no more rubbing.
 

burntkat

New Member
Joined
Sep 14, 2021
Messages
25
Reaction score
10
I got that information from the guy that builds the arms so yeah, it's right
 

Latest posts

Members online

Top