Search results

Hello all I have been rebuilding the engine from our 3.7l 2002 jeep liberty sport. I just honed the cyls and I assumed I could just put in standard piston rings. Well I desided to measure first. Not having the correct tool I desided to check the ring gap with the old rings. Well the the upper...

the piston wrist pin and pin and rod seem for for that cyl. Not really sure what to think. I will post pics in the am.

So I have been investigating this noise it started as this https://youtu.be/ZRl2txy2lmA Which I assumed was a rod knock. After taking the engine apart I did find a bad tensioner. But I wasnt satisfied So I removed the heads and chains and everything else I could and I found this...

I think im going to change the tensioners just to be safe. I already had the motor out when I did this vid. I Just removed the engines with the cats on. The pita for me was the 14mm bolts behind the heads and the starter. Everything is so cramped in there. I have replaced 4.0s 5.2s 5.9s and a...

Im not sure. New vehicle. Had a tick. So i removed the engine thinking it was a rod bearing. There all within spec. I am still replaceing them. But I found one of the tensioners could move and had play and one was solid. Looking for any issues before i put it back in. This motor has been the...

Should the tensioners have play or should they be tight? https://youtu.be/BZGavRkr55Q