Thank you for the advice! I am making the order for the OME kit within the next couple of days. Are there certain distributors that are authorized to sell OME Products in order to get the limited warranty OME has to offer or does it really noy matter? I shopped around and it seems the best deal...
Thank you for the advice! Would you mind explaining the options that are available on the screen show I posted for the front springs?
Also after your post I am leaning towards this lift: https://jeepinbyal.com/liberty-2002-2007-kj/econo-lift-kits-for-the-kj/ome-1-50-lift-kit-kj.html - would I...
So at first I was going to go with Monroe suspension all the way around for my 2003 Jeep Liberty 4x4 but I decided to just raise it a few inches at the same time. The suspension is very rough ATM and makes a loud cluncking when turning & going over speed bumps & stuff.
I will list my options...
So I went to the transmission service center today & the head tech/owner assisted me. We went for a test drive & after the service center that put the engine in had it 2 days ago had my Jeep for the entire day the noise is very slight and the squeaking that could previously be heard outside my...
Thank you all again for your advice. I ended up taking my Jeep to a transmission expert today & apparently the noise is nothing to worry about. He informed me that he hears the slight grinding noise in the shifter area but it is not worth spending $108/hour to try pin pointing the source of the...
Sounds like you made out nicely! I really with I know how to do in-depth things like this but I do not have the tools or knowledge to do it. I do have a friend that can help for a small fee so maybe I will go that avenue if I can not accumulate the proof needed to get the dealer to pay for this...
I have not spoken to a lawyer yet, I did speak with someone at my local attorney generals office & they did say I would be looking at a few grand if I wanted to pursue this. I am taking it to a trans place like I referenced above this Thursday & we will go from there, any input in the meantime...
Thanks for your input! In your honest opinion does this sound like something the dealer did? I setup an appointment with a transmission shop that does this for a living every day & we are going to go through all of the printed receipts/things done to my Jeep since December and diagnose...
Alright I will check that after I get it back, also I spoke with them and they are putting a o2 sensor in now but for the most part they said it could not have been anything they did but I recall the noise starting immediately after I picked it up in January & it has been progressively getting...
So I just spoke to them. They said 100% it's the torque converter and there's nothing they can do since the tramissioms are basically expendable and once they start working on them something else could go wrong. For the most part he's saying he can not put a new transmission in it and they won't...
So I am at the dealership. They informed me that the sway bar bushings were replaced when the other work I referenced above was done. In this case do you think the suspension is causing the clunking? Also just wanted to note that when I got here the squeaking I referenced that was coming from...
Thank you both for your input! It is invaluable to me right now since I will be at the dealership tomorrow at 8 AM to discuss a resolution & hopefully a final one to get all this sorted. They did not replace the bushings and thank you for letting me know that may be it! The ride is a little...
I see alot of members here use the Monroe suspension kit I referenced above, is that kit really just like OEM for a fraction of the cost? I am thinking to get the load balancers as well.
Also the service center was closed today so I will be dropping off my Jeep tomorrow. Thanks!
Thank you! I will be taking the door off tomorrow & if needed ordering the window regulator & motor: https://www.am-autoparts.com/products/window-regulator/AM-32229201.html?m=876&y=2003
Also I have 85k miles on my Jeep & the suspension is making a clunking noise near the front right tire when...
I agree, they even made a note on the work order I got that said up top in all caps: A CLUNKING NOISE WHEN TURNING RIGHT OVER BUMPS - CHECK FRONT.
So they did the following:
- Install both lower ball joints & sway bar
- Balljoint-lower control arm
- Arm-upper control
- Link-sway eliminator
-...
I just wanted to post here as I will be getting over to the dealership at 7 AM on Monday to drop off my Liberty & speak with the manager. So what was replaced last week was the front lower ball joints, the front control arms both sides & the sway bar. What I initially went in for was that when...
I definitely understand that issues can arise with a newer vehicle as well, I was just noting I am getting a 2015 vehicle regardless of having issues right now with my Jeep since I want to have a daily driver I can put the miles on and that I know is going to be reliable, what I was also saying...
Thank you all for your input! I also noted this issue in this post: http://www.jeepkj.com/forum/f196/2003-jeep-liberty-concerns-63331/index9.html
I am going through a ongoing nightmare with a dealership and noticed the issue as soon as I picked up my Jeep this past Friday, I am sure one of...
So it has been a ongoing nightmare with this dealership. Since I last made a comment here some things have happened which I will list below.
1. After having my Jeep back for about 2 weeks I noticed a creaking noise coming from where the shifter is to put my Jeep into gear so I took it back...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.