Search results

  1. M

    Misfire and roughness help

    I'm going to put the two older upstream injectors back in to see if that actually solves the issue being that the reputation of the ones I have are unknown in the Liberty.
  2. M

    Misfire and roughness help

    I ran some seafoam in it Sunday night, and it's seemed to run a little bit better so far this week. I get a little sputtering when I first start driving, but once I've backed out of my driveway it seems alright. I'm wondering if there could be a fuel delivery issue (fuel filter, clogged...
  3. M

    Misfire and roughness help

    I used Denso for the downstream and Delphi for the upstream.
  4. M

    Misfire and roughness help

    Those are exactly the ones I used, with the factory gap specs. Jeep currently is sitting at about 91k. I don't mind doing coils if it'll solve the issue, I just want to know it is the issue before spending that sort of money. I'll move the number 3 coil and see if the code moves with the coil.
  5. M

    Misfire and roughness help

    I'll give that a shot tomorrow. Anything else to consider? It's such a random thing that I'm not sure it is the coil. I had codes from both cylinder 3 and 5, but at different times.
  6. M

    Misfire and roughness help

    I'm getting a rough idle (and sometimes in reverse/drive, but not always), and multiple engine codes. Problem came out of nowhere and is most prevalent as the engine warms up. Codes list: P0132 P0300 P0303 I have gotten P0314, P0137,P0138 in the past. I replaced all O2 sensors and...
  7. M

    First projects on new Jeep

    Thanks for the advice. I'll probably start saving up for that stuff then. I've still got a couple issues, The roughness I'm experiencing is more prevalent now, and doesn't go away immediately like it did. I'm also now getting a P0137 and a P2314 code. Being that the O2 sensors are all new, I'm...
  8. M

    First projects on new Jeep

    I've noticed that. If I go with the JBA arms, could I get the lift ones before I'm lifted? I don't want to spend money on something I'll have to replace again when/if I lift. I was planning on going with the serviceable joints. I already hate not having grease fittings. As for coils and shocks...
  9. M

    First projects on new Jeep

    I've started doing some of that. I'm slowly going through all the fluids. I've done oil and diffs. I've put a new air filter in as well. The Ball Joints all do need replacing, You mentioned the control arms, what am I looking for on those? With the way it rides on rough roads, shocks and...
  10. M

    First projects on new Jeep

    While I'm working, any other things I should be checking out?
  11. M

    First projects on new Jeep

    I'm new to Jeeps and new to the forum. I just bought an '04 KJ with 87,000 miles and after a couple months noticed that I need valve cover gaskets and downstream O2 sensors (engine codes and running roughly). I'm also experiencing a burning smell when I come to a stop. I guess it could be...
View older results

Random media

starting to sand off the original paint
Stains that I was aiming to cover up.
IMG 0972 (2)
Tried teaching my Libby how to play hide n seek today, she didn't really grasp the idea.
dts
IMG 0411
IMG 0023
Darth Vader on the rear glass
11998377 10152889230906191 1444945672 n

Latest posts

Members online

No members online now.
Total: 302 (members: 0, guests: 302)
Top