Search results

  1. C

    What did you do to your jeep today?

    dealership botched the alignment, hopefully i can get it over to a good shop during the week. usually the alignment is fine as far as toe, camber, etc...but caster is usually out of spec (usually between 2.5 and 3 degrees). but now my steering wheel is turned slightly to the right, caster and...
  2. C

    What did you do to your jeep today?

    in the last couple days: new pads, rotors, and calipers. replaced the passenger side parking brake backing plate. ditched the old wheels and worn out duratracs and mounted my MOABS with the 265/70r16 geolanders. installed the new muffler and tailpipe from mbrp. removed the spare tire carrier...
  3. C

    A/C SYSTEM Oil capacity

    will do, thanks!
  4. C

    A/C SYSTEM Oil capacity

    The tag under the hood says 1.25lb of refrigerant and 240cc of oil. The only component i am replacing is the compressor, i am not flushing the system, the compressor did not fail, the clutch is the problem. But it was cheaper to buy a new compressor. Should i add the full 240cc to the...
  5. C

    What did you do to your jeep today?

    I heard what sounded like lifter tick on Wednesday so i replaced all the lifters on Saturday. I have now realized that it is either the belt tensioner or the A/C compressor clutch making the noise. on the bright side, my cams, rockers, etc... all look excellent, some minor sludge at the oil...
  6. C

    Lifters for 2006 3.7L

    I don't consider myself a great mechanic by any means and i feel confident in my ability to replace them. in order to access them the valve covers are the only part that needs to be removed on the 3.7, the cams, rockers, valves, etc... all stay in place. I'm not sure that you absolutely have...
  7. C

    Lifters for 2006 3.7L

    I just Ordered the Sealed Power HT-2308's from rock auto and over-nighted them. I will hopefully see them by the end of tomorrow or Saturday morning. better to be safe than sorry. even if they fit, every picture I see shows the oil hole in a different spot on the lifter between the...
  8. C

    Lifters for 2006 3.7L

    Napa sold me sealed power HT-2271 and they are listed as being compatible with the jeep 02-04 3.7L motor. AFAIK, there should be no real difference in the lifters used on the 02-04 3.7 and the lifters i need for the 3.7L in my 2006. Will the HT-2271 Lifters work or will I be in for a...
  9. C

    What did you do to your jeep today?

    listened to what sounds like lifter noise on the way to work today. I guess I know what i'm doing this weekend.
  10. C

    Corbeau Seat

    you will have to buy a new mount, i have mine still from when I had Corbeau seats in the jeep. pm me if you are interested.
  11. C

    door compatability 2003 vs 2006

    Thanks for the help guys.
  12. C

    door compatability 2003 vs 2006

    Just to be clear: you mean that the 2006 exterior molding will not fit on the 2003 door?
  13. C

    door compatability 2003 vs 2006

    I need to replace my passenger side rear door, (rust has finally claimed it), I am wondering if a door from a 2003 liberty will work on the 2006 model year, i have all of the trim and interior parts from my 2006 that i could swap over, i am just unsure about the door itself. thanks in advance.
  14. C

    Required Fluid Types

    looks like I'm about 52,000 miles overdue for my new motor. time to smash open the piggy bank.
  15. C

    Sway bar end link bolt

    part number 98093A775 from mcmaster-carr is what i used for both the upper and lower swaybar link bolts, they are an M12x1.75mm 70mm in length. (same as the factory bolts). for the nuts I ordered 99908A104, class 10 flanged nylon locknuts that are zinc yellow-chromated.
  16. C

    Sway bar end link bolt

    I just replaced mine with bolts from mcmaster-carr. cost way less than buying the same thing in a mopar baggie, as an added bonus now the bolt head and nut are both 18mm
  17. C

    What did you do to your jeep today?

    ordered new pads and rotors, next will be the E-brake shoes, hardware and cable.
  18. C

    What did you do to your jeep today?

    I have the same pan and I used a lubelocker gasket, no leaks yet. the drain plug has a little seep, when i do the fluid and filter I will add an o-ring or flat sealing washer.
  19. C

    What did you do to your jeep today?

    replaced the driver side brake hose. It looked bad when i first pulled the wheel to clean and lube all the front suspension/brakes, and about 10 minutes later it started dripping quite fast...noticed the brake fluid is dirty, so it looks like a complete fluid exchange will be next, looking...
  20. C

    What did you do to your jeep today?

    ordered up some new hardware for the swaybar links, getting the jeep ready for some rust removal this summer.

Random media

my new helux lights 4 more to go on the roof soon
frontback2
Thirsty Jeep Pig
I was looking out the window the other day and thought the shadow of the flowers looked really cool. Then I got lazy and waited a few hours to take th
packed up headen to highlands state park
Dunes!
winter2
car3
IMG 0680

Latest posts

Members online

No members online now.
Total: 329 (members: 0, guests: 329)
Top