Search results

  1. LONGJEEPOWNER

    trying to unhook harness to back of fuse block

    Had to remove wiring harnesses from my fuse block when I replaced the coil overs. What a pain in the a-- that was!
  2. LONGJEEPOWNER

    What did you do to your jeep today?

    Installed new coil over in the front with new stabilizer bar links and bushings.
  3. LONGJEEPOWNER

    FRONT STABILIZER BAR DIAMETER

    Does anybody know what diameter the stabilizer bar in a 2010 Liberty is? I have tried to order the bushings for it but they ask what the diameter is. It seem that they went to a different size since Liberty's have been around.
  4. LONGJEEPOWNER

    New front end

    Bought a set from AM parts. We will see how good they are. Will let the community know the results.
  5. LONGJEEPOWNER

    New front end

    Bought the complete struts which have springs on them already.
  6. LONGJEEPOWNER

    New front end

    I am in the process of doing the same thing. First off is the struts and rear shocks then off to the A arm bushings and ball joints then followed by stabilizer bar bushings. Mine aren't so bad but I have 132,000 miles on her so I am replacing in the order that I think is good for me. If your's...
  7. LONGJEEPOWNER

    REAR DRIVESHAFT U JOINTS ?

    I've seen the listing for the Dorman shaft but there are other good driveline shops that make good driveshafts with replaceable u-joints. I think I will try one of them first!
  8. LONGJEEPOWNER

    REAR DRIVESHAFT U JOINTS ?

    I was afraid of that when I say the staking on the caps! Didn't know if there was a groove in the yoke for a clip or not. All the listings in the catalogs were for a Dorman drive shaft which this isn't.
  9. LONGJEEPOWNER

    REAR DRIVESHAFT U JOINTS ?

    Update: pulled drive shaft to see what is up and saw that the factor crimps the yoke to retain the caps on the U Joint. Measured caps to be 1.062 on all 4 front and back. Don't know about the other axis measurement because of the crimping. Don't know if the measurement between caps is correct.
  10. LONGJEEPOWNER

    REAR DRIVESHAFT U JOINTS ?

    Does anyone know what u-joints to use on a 2010 jeep liberty sport 2wd? I have been going around and around with the local parts stores about the universal joints. They only show parts for a Dorman driveshaft but I don't think I have a Dorman driveshaft. The caps are of the same diameter...
  11. LONGJEEPOWNER

    KK liberty coolant tank question.

    No, not unless the tank ruptured in the middle!
  12. LONGJEEPOWNER

    Mixing Hoats?

    Replaced my water pump last week because of the same reason. Coolant coming out of the weep hole. I used Zerex G-05 and the only thing negative I can say about it is that I can't see the level in my coolant tank! I mixed it properly and also checked it with a hydrometer. It is good for -40...
  13. LONGJEEPOWNER

    Leaking Transmission Cooling Line

    Does anyone have a fix for a leaking transmission line where it connects to the cooling lines? The leak is where the connection between the tranny lines and cooling line meet. I have taken the e clip out and separated them but didn't see an o ring! I was going to try to replace the o ring to...
  14. LONGJEEPOWNER

    KK Parking Brake - Problem replacing the Springs

    I to did a brake job on my 2010 KK. I had to beat the rear rotors off because of the ring that developed on the outside of the e brake. Just as I suspected I had to buy a e brake hardware kit and replace the retaining pins. I went ahead and replaced the springs also. I had a hard time with them...
  15. LONGJEEPOWNER

    Chinese spam

    I have been getting the same spam occasional when I sign in and look for new posts. It has been happening ever since the new software update.
  16. LONGJEEPOWNER

    Disconnected Plug

    Looks like it has been disconnected for a while!
  17. LONGJEEPOWNER

    Metal or Plastic Impeller?

    I have to purchase a new water pump for my 2010 Jeep Liberty with a 3.7 cu.in. engine. While on line I see that they make the water pump with a plastic or metal impeller. So does the OEM part come in plastic or metal impeller? Which is the better water pump? Thanks in advance.
  18. LONGJEEPOWNER

    2wd = Bad?

    I guess that leaves me out! LOL
  19. LONGJEEPOWNER

    2wd = Bad?

    I have a 2010 Jeep Libby and love it. It's also 2wd and rear driven. The only downfall I can see is in the winter I put on a set of studded tires and some weight in the back. Otherwise great ride!
  20. LONGJEEPOWNER

    Towing Question

    I have a 2010 Libby and tow a 20' Coleman tag along with it. I had a brake controller installed with a weight distribution hitch to stop sway on the trailer. I have towed this setup for over a year now with no troubles. The trailer weighs 3000 lbs dry and not loaded. Ran back and forth from Pa...

Random media

2004 Jeep Liberty Sport 4WD - Dealer Photo 1.8
100 2765
stock.
The day I bought it..plain Jane
P1040236
cwash2
5177.jpg
023
090909 1440[00]

Latest posts

Members online

Total: 589 (members: 5, guests: 584)
Top