Search results

  1. N

    What did you do to your jeep today?

    For this particular relay/switch it controls both turn signals and hazard lights. All you need is a screw driver to to disassemble the climate control unit and remove the radio. It’s a total of (6) screws.
  2. N

    What did you do to your jeep today?

    The turning signals/hazards for the 03.KJ weren’t working on driver side front and rear, I went ahead and replaced the Flasher Relay and I’m back on the road. Now it’s time to replace that rack and pinion bushing and I’ll be content. (Also I swapped the flasher relay from the 07.KJ since it...
  3. N

    Misfire #2 p0302

    I currently have the valve covers off on the 04 KJ, I was in the process of painting them but got caught up doing work on the 03 KJ. Since the valve covers are off I was like I might as well tend to the rockers but this will be my first time doing this job. Thanks
  4. N

    Misfire #2 p0302

    How is the labor for this job and what adjusters did you use ?
  5. N

    Rack replacement

    I found the link to the thread on the temporary fix to this issue is it worth doing
  6. N

    Rack replacement

    Doing the same job also I will like to know
  7. N

    What did you do to your jeep today?

    I have a replacement thermostat housing and (2) replacement 8mm bolts plus the thermostat. I actually tried to fit a few sockets on, standard and metric the only problem is pounding it in there, there is limited space with the sway bar and other Parts in the way. I was going to try and use a...
  8. N

    What did you do to your jeep today?

    Has anyone had to deal with a stripped 8mm bolt on the thermostat housing. I was on my way to replace the thermostat when I noticed one of the bolts was rounded off to the t.
  9. N

    What did you do to your jeep today?

    Mahle Original Valve Cover Gasket VS50325 First time using this gasket brand, usually pick up the Fel-Pro and call it a day, curious about it’s quality, had to order it from parts store wasn’t even in stock.
  10. N

    What did you do to your jeep today?

    My advice is do passengers side first and clean off any oil sludge on valve cover bolts and also make sure to note where each valve cover bolt goes because half are stud and bolt. Plus have a lot of break cleaner and degreaser, you get a lot more room to clean bottom end of engine and other...
  11. N

    What did you do to your jeep today?

    I bought a 04 Liberty, it had really bad valve cover leak and other things that need to be dealt with. I finished removing both valve covers today and I can’t stop myself from cleaning them up, prepping them and painting them. As for the 03 Liberty I did a oil change on it today, I was going to...
  12. N

    What did you do to your jeep today?

    The 07 KJ has been parked for the for a few weeks now. The clutch is slipping. I’m planning on doing the job myself, any advice on the clutch job process. Thank you.
  13. N

    What did you do to your jeep today?

    Didn’t get the chance to take pictures but changed driverside wheel hub on 03 kj. The drive feels so much tighter now. The rack pinion bushings are literally gone so that might be my next job on the 03 kj, might change rack and pinion depends how the labor is looking. Now for the 07 kj, I was...
  14. N

    What did you do to your jeep today?

    Ordered some OEM tail lights from DeadJeeparts on eBay. They just came in today and they are in great condition. Can’t wait to see the 07 KJ with some fresh tail lights instead of old cracked ones.
  15. N

    What did you do to your jeep today?

    Worked on the 03 Renegade today. Replaced passenger side control arm, same thing has driver side both 18mm bolts come off at ease with extensions and swivel(excessive amount of pb blaster)also removing the air box before the procedure. Got my hands on the passenger side lower ball joint and also...
  16. N

    What did you do to your jeep today?

    Is it still possible to install new glass on side mirror housing in this condition/state ?
  17. N

    Important recalls...

    Yes both KJ’s came with tow hitch and both got replaced due to recall. On the 03 KJ the trailer hitch was so rusted I thought it with the original I was surprised when dealership info said it was replaced in 2015.
  18. N

    Important recalls...

    Got the Rear lower control arm recall done on the 07 KJ like 2 years ago including the Trailer Hitch Receiver recall(which is basically a new tow hitch) both are holding up good and minimal rust. Also on the 03 Renegade the f23 front lower ball joints were done in 06 according to dealership...
  19. N

    What did you do to your jeep today?

    Worked on the 03 Renegade today, did the driverside lower ball joint and driverside upper control arm. The 2 18mm bolts inside the engine bay weren’t too hard or rusty to get off(surprised since this car has been on the east coast for most of it’s life),found a clear path with a few extensions...
  20. N

    What did you do to your jeep today?

    Any parts for sale ? lol

Random media

01
Photo114
That be my Jeep
Marble, Crystal Mill, CO. This is the 4x4 road that first got me interested in off roading and why I bought my Lib! A few years back, my sister and I
wired up so only comes on when inside lights come on, ex:when I unlock the car
Jeep KJ Bridge Fishing
Jeep With Basket
P6200378
IMG_20190921_144221

Latest posts

Members online

Total: 421 (members: 4, guests: 417)
Top