Search results
-
CHASING THOSE CODES.
John, I was almost purchased one (smoke machine). I talked to a mechanic and he uses this all the time for evaporator issues. Especially for old vehicles!- MsRandiCook
- Post #7
- Forum: KK General Discussion
-
CHASING THOSE CODES.
Mine was this hose to this control module. It was the bottom hose connection that was old and leaking. Changed the module and fixed the hose and all good. I did have to cleared the code as it didn't go away by itself.- MsRandiCook
- Post #5
- Forum: KK General Discussion
-
Axle housing...structural or isurface casting flaw?
So glad you checked it out! Keep us posted. :)- MsRandiCook
- Post #10
- Forum: KK General Discussion
-
Sunroof minor leak
Just ordered a new seal. When I have the glass out, weedwacker drain tubes too! Thanks for the help! :) Part #: 68032434AC Xtreme Amazing Sunroof Glass Seal for Journey Caliber Nitro Compass Patriot Liberty https://a.co/d/9c7Qt11- MsRandiCook
- Post #6
- Forum: KK General Discussion
-
Sunroof minor leak
I don't believe I have a drain issue. It's a rubber seal issue when it sprays in. Right?- MsRandiCook
- Post #4
- Forum: KK General Discussion
-
Sunroof minor leak
Well, going through the car wash and felt a minor spray. This is just the smaller glass roof, not the patio version. Going to my local glass company to see if they can help. Crossing my fingers. :rolleyes: Anyone else have a drippy sun roof?- MsRandiCook
- Thread
- Replies: 5
- Forum: KK General Discussion
-
cv axles/large lift
I read you can use large diameter washers. Like a fender washer?- MsRandiCook
- Post #11
- Forum: Lift Kit Discussion
-
Assorted interior lights staying on post-battery-drain and recharge…
I'm sorry I overreacted. I thought trying to help was getting shutdown. Me bad..... The Electronic Control Module, or ECU as it is most commonly called, is a generic term used for any embedded system within a vehicle that controls one or more electric system(s) or subsystem(s). The following...- MsRandiCook
- Post #21
- Forum: KJ General Discussion
-
Assorted interior lights staying on post-battery-drain and recharge…
I don't think this is a joke. Why would you say that? I'm offended that you would even say that! The ECM sends out all kinds of commands including, some power up and relay commands, before and after starting. I'm trying to help with out a schematic. I'll just keep quiet.- MsRandiCook
- Post #18
- Forum: KJ General Discussion
-
Assorted interior lights staying on post-battery-drain and recharge…
It shouldn't. The relay should shut down after you pull the key and exit the vehicle. Now this might be a stuck relay? Hmmmmm- MsRandiCook
- Post #15
- Forum: KJ General Discussion
-
No heat while idling
W O W, the matrix! I never though of that! Very Kewl!- MsRandiCook
- Post #16
- Forum: KK General Discussion
-
No heat while idling
- MsRandiCook
- Post #14
- Forum: KK General Discussion
-
O M G.... How did the HVAC system even work?
Good data! My friend who has a 2007 Nitro, we are going to take off the windshield lower cowel and see what we can do. Thank you for this!- MsRandiCook
- Post #13
- Forum: Detailing / Cleaning
-
Assorted interior lights staying on post-battery-drain and recharge…
Such kind words and appreciated thanks! We have varried life experiences and truly want to help! Mystery issues in electrical can drive you to the nut house. Nothing but the best to your Jeep experience!- MsRandiCook
- Post #7
- Forum: KJ General Discussion
-
Assorted interior lights staying on post-battery-drain and recharge…
Parasitic current draws can be isolated by using a multimeter between the removed battery cable at the battery post through the meter on the cable end. Start pulling one fuse at a time. You should pull them all to make sure you don't have more than one pulling current. This way you can either...- MsRandiCook
- Post #2
- Forum: KJ General Discussion
-
Lift, Big Tires Now I need big gears
https://www.tremec.com/calculadora.php I use this for wheel speed calculations- MsRandiCook
- Post #30
- Forum: Lift Kit Discussion
-
O M G.... How did the HVAC system even work?
Thank you so much!- MsRandiCook
- Post #7
- Forum: Detailing / Cleaning
-
-
CEL - Cylinder Misfire
I like where @Ksat is going. Get the timing checked. Really take some time and look at the electrical ground points. Make sure they are clean and tight. Cam sensors are cheap and easy to change. For less than $20.00 install a new one...- MsRandiCook
- Post #8
- Forum: KJ General Discussion
-
Members online
No members online now.