Search results

  1. LibertyTC

    ‘08 KK Need Advice, Threw Timing Chain

    Consider a high quality Jasper engine rebuild with a warranty. They have a few locations in California. Many KK members here have had good success, so feel free to obtain a quote. https://www.google.com/search?client=firefox-b-d&q=jasper+engins+in+california+locations
  2. LibertyTC

    Crankshaft position sensor

    it's a shame so many Mopar sensors today are discontinued. I would recommend the "Standard" brand cps sensor.
  3. LibertyTC

    Sourcing lift kit/components in Canada

    North Shore Off Road in North Vancouver BC or any off their locations can quote you in CAN$ for the OME 927/948 coils. The other company I know of is TFT off road car & truck & jeep accessories quoted me $ 286 per pair of coils. Plus taxes. Their address is 20315 96th Ave in Langley BC- tel...
  4. LibertyTC

    Suspension Squatting over time?

    The KJ CRD is 500 lbs heavier up front. Consider using OME 790 for CRD applications in the front, or for someone with heavy front bumper and winch rated at 500lbs. In the rear, I use the Monroe 58649 load level coil over shocks, say bye to rear sagging !
  5. LibertyTC

    Where does this hose go?

    There is a perfect spot for the 5/16 breather hose with a zip tie. Note the OEM hose with breather cap. It is higher than the horn...
  6. LibertyTC

    Need advice, cold weather blew seal on rack

    I found the link for the polyurethane steering rack bushings. link below: https://creative-steel.com/shop/jeep/kj-liberty/02-07-jeep-liberty-kj-polyurethane-steering-rack-bushings/
  7. LibertyTC

    Need advice, cold weather blew seal on rack

    What year is your KJ? Steering rack will need to be replaced by the sounds of it. Browse "Rock Auto" has a few rack & pinions brands to choose from for KJ. I would also consider polyurethane rack bushings. Don't have the Poly bushings link at the moment.
  8. LibertyTC

    P0340 - fishing for ideas

    When it comes to sensors for the KJ, it is always best to source Mopar parts if possible. You might want to consider another brand in parts beside Autozone...
  9. LibertyTC

    Problem after freeze.

    My pcv was plugged with yellow foam, with below freezing temperatures thanks to short trips. Good synthetic oil and driving the jeep to fully warm up, should cure the issues. My yellow foam was nasty...eek..
  10. LibertyTC

    starting up problen

    Get a fuel pressure test done off the fuel rail. Check the 3 min leak down test as well.
  11. LibertyTC

    Transmission Skid Plate DIY

    Hoping this may also help. Here is what the the OEM transmission skid plate look like.
  12. LibertyTC

    2002 jeep liberty

    IDK if this helps. I'm not the best at trouble shooting electrical. Here is the Chrysler diagnostic trouble codes complete listings we have, that may be outdated: https://www.jeepkj.com/threads/generic-chrysler-diagnostic-trouble-code-list.39860/ Based upon your information: possible issue #3...
  13. LibertyTC

    2002 jeep liberty

    Probably best to scan for OBD stored codes. Do you have a code reader? You can also try the key trick...
  14. LibertyTC

    4x4 shifting issue

    Always move into Neutral first !!! Then pull up on the 4x4 handle.. Going back out of 4X4 place into Neutral, then return 4x4 handle back down. etc..
  15. LibertyTC

    Windshield cracking sound

    Even after the re & re, the KJ shield still leaked. I ran a fine bead of clear GE silicone along the the top edge, and down both sides & leak then finally stopped. I hope the KK windshield is more co-operative. ;)
  16. LibertyTC

    Windshield cracking sound

    If you have any movement in the glass by pressing on it, that is unacceptable. This can lead to leaks and the 3M windshield urethane is rated down to -70. Temporarily, you could get the jeep into a warm space and run a fine bead of GE silicone around the top edge. Glass shops may be able to re &...
  17. LibertyTC

    New jeep owner

    Welcome to the forums. Without a lift, it may want to rub in tighter turns. My KJ 2004, I run 245-65-17 with spider trax wheel spacers. I am hopeful other KK owners will chime in to help.
  18. LibertyTC

    New to KJ and info on the lift I’m installing

    Welcome to the forums. I personally would only recommend Old Man Emu spring lifts. Jeepin by Al control arms etc. Please see our Lift Section Kj lift Kit section link below. https://www.jeepkj.com/forums/lift-kit-discussion.203/
  19. LibertyTC

    Help identify source of an oil leak

    Does not look overly wet, not dripping from your quality Mobil 1 filter. In behind the oil filter, there is the oil pressure sensor worth inspecting.
  20. LibertyTC

    Its time I introduced myself.

    Welcome to the forums. What city or country do you live in? The 2004 was probably the best year as it did not suffer from window regulator issues. Have you obtained the build sheet for your Jeep? If it has the Trac Loc rear differential, it will require the 4 oz bottle of Mopar friction...

Random media

New wheels
Near Starved Rock State Park (IL)
619.jpg
ARB Bumper
0905161841a
Clearance test. Still have additional framework to install.
Rear differential
IMAG0060
Winter Is Coming

Latest posts

Members online

Total: 259 (members: 6, guests: 253)
Top