Search results

  1. I

    Rear glass lift struts

    I did mine last wekend with some ebay specials, the wife struggles to shut the glass now.
  2. I

    Setting the pinion torque on axle rebuild

    Yep, already got some to soak the clutches before installing them. Managed to swap them out using a couple of big bolts and washers. Looking at the gunk I don't think the oil had been changed in this old axle I picked up particularly often. Guessing its rare to find a liberty that has been...
  3. I

    Setting the pinion torque on axle rebuild

    Thanks, that's excellent. Its actually a 2004 axle too, which I probably should have said. I will do the first few short break in runs and check the temperature to make sure its all good. I am now thinking caliper/springs/shocks......just to finish off the rear end. Old axle is noisy after...
  4. I

    Setting the pinion torque on axle rebuild

    Hi, part way through a rear axle rebuild for my Liberty. Hoping there is someone out there who plays axles or has a FSM. I got a spare axle with tracloc (lucky find) so I didn't need to hurry the build, and have fitted new bearings and clutches so far. I am now torqueing up the pinion...
  5. I

    8.25" rear axle differences

    I have to replace my rear axle and so far navigated the minefield of choices. 3 channel ABS and rear discs as i have a 2005. As far as i can tell the flanges appear to match too but i havent measured that. Today i bought another axle to check over and rebuild so i can take my time with it...
  6. I

    CV and intermediate axle

    Maybe the electronics get confused but i cant see anything mechanical happening. Sent from my SAMSUNG-SM-T217A using Tapatalk
  7. I

    AC Compressor/ Full AC Kit?

    I thought my AC compressor was going, but it was actually the waterpump. The load on it changed with AC engaged and made it knock. Pump had never leaked and i had pulled the compressor before realising it hadnt self destructed. Sent from my SAMSUNG-SM-T217A using Tapatalk
  8. I

    AC compressor

    I bought it for my 05. I believe it fits all the 3.7s whichever year.
  9. I

    AC compressor

    Reman unit bought from Cool Air Parts earlier this year. Never used or fitted. Absolutely perfect/spotless part. My rattling noise was the waterpump despite it not leaking! Jumped the gun a bit with ordering a pile of parts. $100 Local pick up from Lisle IL is preferred but if you...
  10. I

    thread tap to clean rusted weldnuts?

    Wont chrysler fit one for free? Sent from my SAMSUNG-SM-T217A using Tapatalk
  11. I

    First time Jeep/Chrysler owner

    Looks nice, similar soec to mine. I left the chrome on for a stock look and something to polish.
  12. I

    Ciao a tutti!

    Hi, welcome to the forum. I am english, but lived in I Turin and Modena before moving to the US. First car i bought... a liberty.
  13. I

    HOW TO: fix the KJ fuel burp plague!

    Thanks for the detail. Might give this a go at some point. Problem is i will also see some rust and either havr to do something about it or moan about for a few weeks after.
  14. I

    Gas filler splashing back

    My missus manages to stop when she can hear it getting full. I on the other hand get petrol everywhere.
  15. I

    Front Speaker Replacement

    I wil have to look up our build sheet. One thing i do know it didnt have the offroad package. The rest is just guess work. Sent from my SAMSUNG-SM-T217A using Tapatalk
  16. I

    Front Speaker Replacement

    I did turn it around as it sits against the door better, the outer edge was flatter. I did think it was better having the heat sink pointing to free air. I dont think we will be getting the amp too hot in our use, but nice to know it is 'as recommended'. Sent from my SAMSUNG-SM-T217A using...
  17. I

    Front Speaker Replacement

    Thats a good guide, i would have spent a bit more time researching it if i had known it had the upgraded system. Did it come standard on the limited?
  18. I

    Front Speaker Replacement

    Thats pretty much what i did, except i keep mine down under the speakers, i cycled the windows and there wasnt a problem. I also used zipties to hold the amps in as they dont come loose and i had plenty of them! I though a bit of hard foam or rubber betweeen the door and the amp would let it...
  19. I

    Front Speaker Replacement

    I mounted just under the speaker to the inner door. Space is limited and i wanted to keep the wire runs as close to original as possible. Space is limited between the speaker screw inserts but it fits. To do it properly some stick on foam pad would help with making sure the amp pulled nicely...
  20. I

    GLJT Toys 4 Tots Run - Chicago, IL - December 14th, 2014

    Couple of facebook groups i follow are doing this. Will see how time goes.

Random media

Jeep2
SSPX1039 2
I have lived in the San Diego/ North county for 40+ yrs and grew goin to berrego springs and the desert this is the first time I seen it blooming
Basket from front
DSC01940 (Small)
097
Preparing for a Fixie Safari Tour
Puts a smile on my face
20220222_142312.jpg

Latest posts

Members online

Total: 339 (members: 2, guests: 337)
Top