Search results

  1. J

    crank but no start

    UPDATE: Problem was the connector directly to the fuel pump. I had to get a new module/pump assembly. put it in and car starts and drives! thank you everybody for your input.
  2. J

    crank but no start

    i jumped pins 30 and 87 and did not hear the pump engage. I removed the pump from the tank and bench tested it without the module attached and it seems to work just fine.. I then attached it to the module and powered it up there and even the very connector that plugs into the pump itself and it...
  3. J

    crank but no start

    I knew of that trick. That's the first thing I tried heh. . I cranked the vehicle with the voltmeter on that fuse and it drops to about 8.5v while cranking. I assume this is not normal?
  4. J

    crank but no start

    I get 11.9 volts on both sides of the fuse and 12.3 at the battery. Thanks
  5. J

    crank but no start

    Thanks, ya 06 does not have the access door. but yes depending on the spark test tomorrow I'll have to just suck it up and drop the tank
  6. J

    crank but no start

    I have an 06 liberty 3.7 and today i tried to start it and It will just crank and crank but will not even try to start. I have zero fuel pressure while cranking, I cannot hear the fuel pump turn on. my relays for the fuel pump and asd are clicking when i turn the key on. I tried swapping...
Top