2002 Multi switch with fog $20

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1BADKJ

Full Access Member
Joined
Feb 18, 2012
Messages
502
Reaction score
6
Location
Barnegat NJ
Is that the kind of switch that let's the fog lights only come on when the low beams are on.
 

JeepCoMJ

Full Access Member
Joined
Nov 29, 2010
Messages
629
Reaction score
10
Location
SE WI
Of course. It's the complete turn signal assembly etc. only way to keep fogs on. Is add a ground to the fog relay
 

ckorch

Full Access Member
Joined
Feb 12, 2013
Messages
41
Reaction score
0
Location
Arkansas
Will this work on non fog light liberties? What more would I need? Thnx

Sent from my SPH-L710 using Tapatalk
 

JeepCoMJ

Full Access Member
Joined
Nov 29, 2010
Messages
629
Reaction score
10
Location
SE WI
It will still make turn signals, hi/lows, interior lights, and wipers work.

Obviously, if you don't have fogs, they won't work.
 

ckorch

Full Access Member
Joined
Feb 12, 2013
Messages
41
Reaction score
0
Location
Arkansas
so if i bought the fogs and this multistick is there a wire harnass i need also? or will my 02 sport have the wires in there to make this work?
 

JeepCoMJ

Full Access Member
Joined
Nov 29, 2010
Messages
629
Reaction score
10
Location
SE WI
I believe you would need the complete headlight harness as well, which I do have. But if you have EVIC, then you need to do a bit of wiring work (swap pins, peel harness out) to put the wiring for the ambient temp sensor in.

Other than that, everything *should* be there, but I'm unsure of whether your bumper cover will have the mounts molded into it for the fogs to mount to, or not. You will want to double check that.
 

ckorch

Full Access Member
Joined
Feb 12, 2013
Messages
41
Reaction score
0
Location
Arkansas
Sorry been gone from internet for a little bit. How much for fogs, multi switch, and harness. My liberty does not have evic. It is as basic as the sport model can be.

Sent from my SPH-L710 using Tapatalk
 
Top