245/70 to 245/75

[Vranes17]

Saw a cheap pair of MTs on CL but their a little bigger than mine. Mine are 245/70 and these are 245/75 is that not gonna fit?

I have no lift all stock

 

[HoosierJeeper]

It'll be a very hard fit.....short answer is probably not.

 

[ThunderbirdJunkie]

it'll rub like crazy. your fender flares won't like you.

 

[Vranes17]

Is there anything cheap i could do to make them fit?

 

[bmrrwolfe]

Is there anything cheap i could do to make them fit?

Possibly 2 isolaters in the back, and clevis up front, with the pinch weld pounded, and don't turn too hard!

 

[Vranes17]

wamp, too much to do

 

[ThunderbirdJunkie]

Yeah, lift it.

 

[bmrrwolfe]

Yeah, lift it.

x2, simple enough

 

[Vranes17]

Yeah, lift it.

x2, simple enough

Okay! Come install it for me!

 

[speedracerbubba]

lift is easiest way to get minimal rubbing. When I put my goodyear mtrs on (245/75/16) it rubbed on the inner fenders, especially when going in/out of driveways. The rear rubbed badly when articulating on obstacles and even knocked the plastic trim off bottom of the door. I put a daystar spacer lift on to save some money vs new springs/coils and it clears just fine, I just get rubbing on the sway bar in front on full lock. I recently stuff the tires in the wheelwells while on the trails and I do not have any problems with rubbing while articulating.