Axle/wheel bearing play..

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JamppaL

New Member
Joined
Oct 13, 2019
Messages
7
Reaction score
0
Tried to search similar topics but couldn't find any so..

My Liberty has Chrysler 8.25 limited slip axle and the car clunks at slow speeds, probably higher speeds too but can't hear that too well. At first I thought the cause has to be rear UCA or LCA but they are solid. Today I jacked up the car and the rear tires (both) has excessive side to side and in and out play and that sounds like exactly the clunk i've been hearing.

Any ideas what might be causing this? Wheel bearing, C-clip or LSD pack worn out? My liberty has been driven only for 26k miles and I changed the rear diff fluid with lsd additive like 3k miles ago.

Any input would be greatly appreciated!
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,649
Location
Southeastern Ohio
What do you call excessive play ?
There will always be some in and out play, will never be fully tight ( there is an issue if it is )
 

JamppaL

New Member
Joined
Oct 13, 2019
Messages
7
Reaction score
0
What do you call excessive play ?
There will always be some in and out play, will never be fully tight ( there is an issue if it is )

I can move the tire in and out and a little side to side and hear the clunk noise. There is not supposed to be any noise with the in-out movement, right? Like clunking :eek:?
 
Top