Offroad Bob
OffroadBob
Has anybody heard of or used the new Extended Travel front CV Axle shafts for sale at Orielly Auto Parts ? It says that these shafts are for lifted Libertys and are for extended travel and have a higher degree of articulation meaning you can have the shafts in a greater degree of angle from the Transfer case to the wheel hub. These are new, not remanufactured shafts, have a lifetime warranty (no labor of course). Overall compressed length is 22 5/8". Also says you have 44 mm of extended travel length over the stock shafts. It also says you can run up to a 47 degrees of articulation angle vs 23 degrees with the stock shafts. I am seriously considering these when I go to rebuild front end in a week or two. I already have Bilstein coil over struts to install and I have a set of lower control arms I bought at the LKQ lot and then had all new Moog bushings installed in them. I will be also be replacing the lower ball joints and brake pads and figured I might as well do the axle shafts while I am in there. Mine has had a 2 1/2" lift on the front for many years and i will be taking out the spacer lift when I install the Bilstein setup. I copied and pasted the description from Orielly and attached them below, but no pictures on their site yet.
Any thoughts or suggestions ?
Any thoughts or suggestions ?
You must be registered for see images attach
You must be registered for see images attach