No low beam

[TheCanadian]

So I ran into an issue the other night where my high beams were stuck open. This is a thing since I use an after market HID harness.

Normally I'd hold it in high beam then they'd turn off and I'd have highs and lows again.

Now when I hold high beams they just turn off, and when I put it to high beam they turn off and stay off.

I thought I'd come here before I rip things apart to see if there's something I could try.



- I can hear the "Click" in the steering column when I put it into high beams.
- I've unplugged the connector and blew it out since I didn't have electrical cleaner on hand to see if anything got stuck in it or there was any dirt.
- I've swapped bulbs as well to see if that fixed the issue.
- I haven't switch the the old harness yet since I'm still trying to find my H13 bulbs I have kicking around somewhere.

 

[TheCanadian]

I'm going to do some testing with this. I'm going to replace whatever fuses may have blown.

I'm also going to try and find my H13 bulbs and see if my high/low works.

 

[TheCanadian]

I replaced the fuse's and the one for my harness. All is good and working now.

 

[lfhoward]

Glad it was an easy fix. Good job!