Hey guys need a little help/advice here. I bought rear Dakota crew cab 4wd bilstein shocks 33-185859. I’ve been doing a lot of reading on here and alot of people say to use JBA sleeves/bushing kit. I did not happen to see them on their website. I did get in contact with someone from there and was told they no longer make that. Does anyone know where I can get them or an alternate way to be able to mount these? TIA
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
None that I know of , go to hardware store with shock bolt and shock and try to findpipe that will work
They are good for a 3=4 inch lift
2TALL1
Member
Read this:
www.jeepkj.com
Bilstein Question's
This is for the rear shocks with 948's Which 5100 series will just bolt up without any different grommets or washers, spacers, Ect.........?? My head is spinning from so many different Part numbers and need for this and or that. I read and take notes I bet I have 7 different numbers wrote...
www.jeepkj.com
Try 24-185660s
they are 5100s and work great with 2.5 -3 inch lift
I run these on the rear of the 03
they are 5100s and work great with 2.5 -3 inch lift
I run these on the rear of the 03
