Replacing light bulbs in tail light? Help!!

[cueball060]

Maybe I'm an idiot but all I can see is pulling the screws on the inside. I am afraid to pull on it. Thanks for any help.
Aaron

 

[Ry' N Jen]

Once you have the TORX screws out, just apply some leverage to all the logical places on the tail light assembly and give it a tug...

 

[jsc7002]

yep its really easy to do, i just use a flat head and pry just a little and it comes right off

 

[JeepJeepster]

Just me but I wouldnt pry against the paint at all.

Just pull straight out.

 

[hyde]

Unless you have one of those flexible spatulas.
It took me a while the first time I tried to remove them, but after first time, they "get used to it".

 

[tan's2002kjlimited]

Just me but I wouldnt pry against the paint at all.

Just pull straight out.

If you're going to try to wedge it off with a screwdriver or something,
slip a piece of thin cardboard between the driver and paint to keep from scratching it.

 

[kj924]

Got a 3rd brake light bulb Friday at Napa for .85 cents.

Not sure what # it was.

 

[Marlon_JB2]

Got a 3rd brake light bulb Friday at Napa for .85 cents.

Not sure what # it was.

921

There goes your number

 

[guitarzen]

U R not alone, CueBall. I felt the same way.. found this while surfing Google.

http://www.youtube.com/watch?v=vkdzRWTx8MM

 

[cueball060]

thank you too all who replied. time to take it on the beach.