tjkj2002
Full Access Member
- Joined
- Dec 17, 2006
- Messages
- 10,612
- Reaction score
- 41
You must be registered for see images
You must be registered for see images
You must be registered for see images
Think I'll need to trim some......
- Thread starter tjkj2002
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
tjkj2002
Full Access Member
- Joined
- Dec 17, 2006
- Messages
- 10,612
- Reaction score
- 41
They'll be on by the end of the yearYou put those on and you will need a "Sasquatch" sticker ......
Dave
.
Treyz02KJ
Full Access Member
About how much should I expect that sweet rhino liner (excuse the name brand usage) lower body spray to set me back? Do you remove the peices or tape and paint?
p.s. Your KJ is in my dreams.
p.s. Your KJ is in my dreams.
tjkj2002
Full Access Member
- Joined
- Dec 17, 2006
- Messages
- 10,612
- Reaction score
- 41
This what I used---http://www.uschem.com/index.cfm?page=products&catid=21&pid=2---the TBL one,the Defender just came out with the Kevlar in it.The lower belt line,bumbers,and roof would use about 1 1/2 gallons.Each kit is one gallon sprayable and runs about $200(the tintable version is a little more $$$).You need the $20 spray gun also.
I've sprayed mine a few different times due to aftermarket add-ons,but when I originally sprayed the beltline,flares,and OEM F/R bumbers I did not remove,just taped off and sprayed(preped surface first ofcourse).
