Latest activity
-
IIsan replied to the thread ABS module rebuild.To anyone who may find this thread down the road, "Module Master" at modulemaster dot com will do it. I don't know if that is who op...
-
DadOSix replied to the thread 2004 Jeep Liberty Rear End Issue.Broken/loose upper control arm ball joint mount. Where the stud for the upper control arm in the rear attaches to the rear... -
KJowner replied to the thread Knocking Noise and Metal in Oil.Sounds like a misfire, along with the tapping, noise is very top end so I wouldn't condem it just yet, definitely time to pull the heads... -
My guess would also be bad new lower control arms or maybe the mounting bracket holes are egged out
-
Are your Trac-Lok's stuck? Another possibility is that one of the brakes is stuck on.
-
Any bolt holes egged out?
-
KJowner replied to the thread Charging issue.Yes, the alternator field is controlled by the ECU, you should only fit the correct alternator for the Jeep. If you have bought the...
-
KJowner replied to the thread Broken sway bar link bolt.How much have you lifted it?
-
Today the sway bar assembly came together! I am still waiting for a new Mopar sway bar to be delivered, so I installed the rusty one...
-
KJowner replied to the thread lifting back to stock height..It would be much nicer to drive if you lifted it level instead of like a powerboat.
-
KingKJ replied to the thread Knocking Noise and Metal in Oil.The knock was also accompanied by a constant misfire on cylinder 6, it's been doing it for a bit just from the head gasket, but now it... -
KingKJ replied to the thread Knocking Noise and Metal in Oil.Right now it sounds like the end of my liberty and it is most likely gonna end up being parted out, but I'm open to any thoughts/ideas...
-
Well right after I started ordering parts and getting ready to fix my jeep it started having a random knock. There isn't any rhythm to...
-
KingKJ replied to the thread Fender flares.If you look on youtube you can find people who install the fender flares from a wrangler onto their liberty, there is also the option of...
-
Sseafish replied to the thread 2004 Jeep Liberty Rear End Issue.My guess would also be bad new lower control arms or maybe the mounting bracket holes are egged out
