Wiring and connectors...

eddiev9 · Aug 2, 2007

Does anyone know the AWG on the wiring that attaches the HU?
I'm trying to crimp on connectors to the battery and accessory wires without stripping or soldering. What are those called and where can I find them?

Thanks!

billforde · Aug 2, 2007

Why not use an add-a-circuit instead? This is what it looks like http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=071-580.

sevenhelmet · Aug 3, 2007

Looks like 20 gauge wire to me, I was just poking around in there a couple days ago.

eddiev9 · Aug 3, 2007

billforde said:
Why not use an add-a-circuit instead? This is what it looks like http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=071-580.

How would that work? Is there one slot for the battery and one for the accessory in the fuse panel?

sevenhelmet · Aug 3, 2007

Plugs into an existing fuse receptacle and gives you a fused pigtail (red wire) while still protecting your original circuit. Make sure to run another cable from the new circuit to a ground somewhere (there's usually a grounding screw near the battery in the engine compartment.)

billforde · Aug 3, 2007

eddiev9 said:
How would that work? Is there one slot for the battery and one for the accessory in the fuse panel?

Yes, in the fuse panel (driver side door), some of the fuses are always on (battery), and only when the key is in the on position (accessory). Basically, you remove the existing fuse and slide that device into its place.

You must be registered for see images attach

Wiring and connectors...

eddiev9

Full Access Member

billforde

Full Access Member

sevenhelmet

Full Access Member

eddiev9

Full Access Member

sevenhelmet

Full Access Member

billforde

Full Access Member

Similar threads

Random media

Latest posts

Members online