Shankster
Latest activity Postings About
-
-
Shankster replied to the thread Where would I find some of these nerf bar mounting bolts?.No amount of googling M bolt or M-bolt comes up with anything similar. I also can't find a Mopar parts diagram with the tow hooks that... -
Shankster replied to the thread Where would I find some of these nerf bar mounting bolts?.Ah, good info re the tow hooks. The used tow hooks I bought and installed had a different fastening system but I see them new on Ebay...
-
Shankster posted the thread Where would I find some of these nerf bar mounting bolts? in KJ General Discussion.I was using the original / stock nerf bar mounting brackets to attach some home made rock sliders and I sheared one of these U-bolts...
-
-
After bruising one of my rocker panels I decided it was time to add some rock sliders. Bought a cheap welder off Ebay and some 1-3/4"...
-
-
Shankster replied to the thread A Driver's side Thunking Mystery.Yep, I did that.
-
Shankster replied to the thread A Driver's side Thunking Mystery.Don't mean to hijack the thread but sounds like the OP is off to greener pastures anyway. I just stumbled on this - I've been chasing a...
-
Shankster replied to the thread Help with mystery front driveshaft.Thanks for the pics - my TC flange looks just like the top one but with 6 threaded holes instead of 8. You've reassured me that I could...
-
Shankster replied to the thread Help with mystery front driveshaft.Hmm, what makes you think the flange on the t-case got changed? Looks like the standard driveshaft flange is 6-bolt and mine, while only...
-
Shankster replied to the thread Help with mystery front driveshaft.Figured I should put this thread to bed. I finally got sick of the squeaking and reached out to Mako Driveshafts (Oakland Park, FL) for...
-
Shankster replied to the thread Do I have the parts correct for my lift kit and what is the difference between front and rear height.I just looked at RRO and JBA websites. Not seeing what you're seeing. A pair of UCAs from RRO is $449. A pair of UCAs from JBA is $475...
-
Shankster replied to the thread Do I have the parts correct for my lift kit and what is the difference between front and rear height.What I meant to say was that the RROs are not better than the JBAs. I initially did my lift with the stock UCAs but the passenger side...
-
Shankster replied to the thread Do I have the parts correct for my lift kit and what is the difference between front and rear height.No benefit to the RROs. Mine have been fine and I had no issues with the company but some on here don't like them. Go with the JBAs for...
-
Shankster replied to the thread Do I have the parts correct for my lift kit and what is the difference between front and rear height.Maybe I'm missing something but I don't think the spacers will do any of those things. I'm intrigued by those longer CV axles but note...
-
Shankster replied to the thread Do I have the parts correct for my lift kit and what is the difference between front and rear height.It's been a while since I did my (very similar) lift (2020, 8,000 miles ago). I think I got about 3" of lift on the OME springs but...
-
Shankster replied to the thread Need help identifying these control arms so i can refurbish them and replace the ball joints..They look just like RRO control arms too which also use the Moog K-6292 ball joint. Bottom line, you're probably safe going with Moog...
-
-
Loading…
-
Loading…
