GnomeKing's latest activity
-
If the gasket has failed, you very likely need the head surfaced. It sux, but that is the nature of aluminum. I used the felpro blue... -
-
Probably a head gasket leak. Doesn’t have to be the end of the Jeep at all. Resurface the heads, install new gaskets, and keep driving it.
-
I agree. Liberty Electronic Gremlin Hunting should always start with the battery.
-
GnomeKing replied to the thread Manifold Absolute Pressure Sensor Connector.Rockauto has pigtails too...
-
GnomeKing replied to the thread Sensor issues.@Cbach Did you have the code coming back? I tried bunch of aftermarket sensors without success...
-
2005 Jeep liberty 3.7L. Been chasing a P0344 code for a little over a year now. Last year I replaced the camshaft position sensor with a...
-
GnomeKing replied to the thread Camshaft Position Sensor.@dirtbagjack What brand of CPS sensor did you use? I replaced (and unfortunately prematurely threw away) the original camshaft position...
-
GnomeKing reacted to cjaccardi's post in the thread Help. Where is the Map sensor for a 3.7l 2005 lliberty with
Like.
I guess it is. For people in the future looking for the map sensor , here is a diagram Thank you again ! number 2 is the MAP -
GnomeKing reacted to uss2defiant's post in the thread '04 Stalled twice today, 4 codes thrown - crank and cam sensors but I just replaced with Like.
yes. replace both CPS and CKS. They are causing the misfiring and the symptoms you've described.
-
GnomeKing reacted to uss2defiant's post in the thread P0344 Code on 2004 Jeep Liberty 3.7L V6 with Like.
when i had this code, i had to replace both ckp and cps
-
from my personal experience, i had to change both CPS and CKS for this code to resolve. Aftermarket sensors seems to be tad longer which...
-
P0562= Battery Voltage is Low : Charge up battery & then Check with a Voltage ohm meter/ or replace battery, ensure no corrosion &...
-
GnomeKing replied to the thread hub bearing bolt size?.@albrandwood thanks for pointing out the torque-spec! I didn't check how the bolts are stamped, and only needed to replace on of them...
-
Working on an '05 Liberty Sport... Not sure why I thought any of the existing E18 bolts would be reusable ... nothing else has come...
