KJowner's latest activity
-
KJowner reacted to BASA Jeep's post in the thread 2003 CRD cooling system parts missing ? with
Like.
Thanks for the manual link, after comparing against the manual. It looks like just one pipe has been blocked. We think this was done to... -
Thanks KJowner. I found it, the pipe was disconnected, I put it back in place. I plugged it.
-
Whatever you do or use, make sure you post up here with where you found it. Sometimes the older links don't work anymore, so new ones...
-
KJowner replied to the thread Seized upper control arm bolt. Attempt to remove it myself, or admit defeat and take it to a garage?.I've got a makita recip saw, with a decent blade it's nearly as quick as an angle grinder but way less messy, I cut an old axle up with...
-
towed that bad boy home today. see my totally ghetto extended mirror setup. it worked. not great, but well enough for the 1 time I...
-
KJowner replied to the thread 2003 CRD cooling system parts missing ?.What parts are missing? I have a UK spec 2004 CRD if you need any pictures of the cooling system. The manuals are available for download...
-
I have just ordered a TPMS bypass box for my wife's Renegade, not very useful for our old KJ's, however it could be very useful for all...
-
KJowner replied to the thread Auto transmission stuck on low gear.Low gears 1&2 are limp home mode with the transmission in non electronic control mode, however if its only selecting 1 then you may have...
-
KJowner replied to the thread PCM PROBLEM CODE, SENT TO FIX, SAID NOTHING WRONG.If there is enough space to get the screw clip on then I wouldn't worry, unless you have an air leak it's only cosmetic. Ebay is full of...
-
Thank you very much for allowing me to become a member of this community saying hello form NY
-
KJowner replied to the thread 2004 Jeep kj 2.8 crd EGR Removal.There are 2 different systems, the earlier Jeeps with a waste gate controlled turbo and the later jeeps with a VNT. I haven't worked on...
-
brakes are fixed. I don't want to talk about it any more.
-
KJowner replied to the thread 2.8l crd start issues..Possibly, drawing that much current isn't a good sign!
-
KJowner replied to the thread Seized upper control arm bolt. Attempt to remove it myself, or admit defeat and take it to a garage?.If you can get in with it an impact driver is probably the best thing + lots of plus gas or similar.
-
KJowner replied to the thread Wrong forum.Start with easy stuff, try a jump lead from the battery to the block, check the ECU earth etc, just plod through it and don't forget to...
