KJowner's latest activity
-
KJowner replied to the thread Covered the Rust.Pop the door cards off and blast waxoil or similar in to give it a few more years. -
Just thought I’d share a cheap option I used to keep my wife’s rusty Liberty looking good for a little while longer. With 230,000 miles...
-
This cost me about $20 since I couldn't find the bolt and thrust bearings locally. It worked like a charm. Way better than spending...
-
KJowner replied to the thread UK 2.8 CRD (2005) For sale.Good luck, try Facebook marketplace too. & make sure you mention its in the cheaper tax bracket.
-
eBay it is then...
-
Ha, I'm the idiot, its a 2012......too many jeeps in the family (5), all different years. i'm good now.. thanks all
-
The gears are certainly not interchangeable, but the diff carrier is. Just ask the Spartan helical diff that was built with the standard...
-
Bought some new bulbs today - thought I would experiment with making a new harness with larger gauge wires, so I bought a few connectors...
-
^^^its called MAP gas and it does burn hotter then plain propane. Unfortunately can no longer get it in California
-
KJowner replied to the thread Loud intermittent noise pulling hard right braking..Did you replace the brake hoses?
-
KJowner reacted to ikuo78's post in the thread 2005 Jeep liberty sport - power steering issues with
Like.
You may want to try bleeding the air out. Without starting the engine, lift both front wheels and turn the steering wheel from lock to... -
KJowner replied to the thread Using more fuel than usual.Yes, they don't like running cold. When you replace it ensure you only use HOAT antifreeze, other antifreeze isn't compatible with it...
-
KJowner replied to the thread Which Glow plugs? and a P1261 Code.Denso are decent quality, so are Bosch. Have you checked your cars voltage? You need to get plugs to match whatever voltage you have...
-
KJowner replied to the thread What did you do to your jeep today?.MAPP gas? Edit... as above, my phone didn't show all the other posts!
-
If I were you, I’d stop and pull it back down to valve covers to try and verify the correct positions. It is entirely likely that you...
