KJowner's latest activity
-
Just a FYI - "Front End Suspension Noise" - Don't have Grease Fittings! I had a growing amount of front end noise when hitting bumps or... -
my 2 cents. I also needed to flush the heater core . now time to change engine coolant as is old. no advise other than stuff in heater...
-
KJowner reacted to Hec In Omaha's post in the thread OME/Bilstein Lift for "Quackers" our 2009 KK with
Like.
Howdy all! I decided to start my lift build here instead of continuing on in my other thread regarding scalloped front tires. Summary... -
KJowner reacted to belvedere's post in the thread Seized upper control arm bolt. Attempt to remove it myself, or admit defeat and take it to a garage? with Like.
Since only the tip of the blade was being used (because of access), I took the dull end off with my bench grinder and got more life out...
-
KJowner replied to the thread How To: Change front driveshaft / change a driveshaft head.Sadly they never fitted a factory front LSD to any of them. There is a current post on here about fitting one though.
-
KJowner reacted to DavidG91's post in the thread How To: Change front driveshaft / change a driveshaft head with Like.
Great thread. Thanks all. I am getting a very loud grinding noise when moving 4wd even at slow speeds and in a straight line. It sure...
-
KJowner replied to the thread What does this plunger valve thing do?.I think it's open in all positions except recycle - knob fully turned to the left. In really cold weather I find that's the hottest...
-
It's summer here in Queensland Australia. A consistent top of around 30 degrees.. or 86 Fahrenheit. I guess I'm just a little over...
-
KJowner replied to the thread Seized upper control arm bolt. Attempt to remove it myself, or admit defeat and take it to a garage?.Drop the saw speed and don't press too hard and your blades will last much longer a bit of Rocol helps too.
-
KJowner replied to the thread New KK owner with questions.Possibly, depending on how hot the surrounding temperature is, where I am right now everything is cold and wet!
-
KJowner replied to the thread Torque converter bolts.Is the knock just on start up?
-
KJowner replied to the thread New KK owner with questions.All engines sit at around 90°C is the temperature gauge sitting where it should be?
-
KJowner replied to the thread Temp going up when going over 60 mph in highway for long time.That's a possibility, no telling what's been done to a 20 year old car.
-
As a followup to the question about cutting anything in the back - while I have the dash apart for heater issue a snapped a pic of area...
-
KJowner reacted to doublederrick's post in the thread Jeep kj 2005 front diff leak and noise with Like.
I just tore it apart this morning and saw that it wasn't a needle bearing but as you said it's OK to pull that out and just pop in the...
