KJowner's latest activity
-
KJowner replied to the thread Front differential crush washer/pinion nut torque 500 ft/lbs??.It's still in spec & it's only going to wear loose so I'd leave it. -
KJowner replied to the thread Grey smoke - lots of it!.Yes, that's about all you can do without pressure testing it. Make sure you are using the correct HOAT antifreeze or you can have...
-
I added the deep sump PML transmission oil pan a few years ago. It made a big difference in lowering and keeping transmission fluid...
-
KJowner replied to the thread Grey smoke - lots of it!.It's either a blown head gasket or if you are really lucky a leaking EGR cooler.
-
KJowner replied to the thread CRD CV Axle.Search on here and lost jeeps, it will have been covered
-
I have, it's fine. I bought it 6 yrs ago used of course with 170000 miles. It appears to have been submerged 1/3 with front end deeper...
-
FIXED. I located the siren alarm unit, and removed it. It's behind RH headlight.
-
FIXED. Well, sort of. I located and removed the alarm unit with siren. Job done!!
-
FIXED. I noticed water behind the dashboard in a little gap as I opened the door. I removed door rubber trims and after a couple of...
-
KJowner replied to the thread Passenger side flood.You will have to try and dry it with old towels etc and then feel for it. Just a thought, you have checked the roof for rust holes...
-
I’ll try that and I’ll answer you the results back but how would I know it’s filling up with water if I don’t see any water leak from...
-
KJowner replied to the thread Passenger side flood.Try putting the hose just on the windscreen and see if any water comes in under the dash, if not try the hose on the door windows and...
-
KJowner replied to the thread Passenger side flood.Passenger side front footwell? Sunroof drains or scuttle drains would be my first guess.
-
I used polyurethane "Super Pro SPF4019K" for the LCA bushes, bought them in the UK, but they are made in Australia. Very expensive...
-
KJowner reacted to JeepJeepster's post in the thread Front differential crush washer/pinion nut torque 500 ft/lbs?? with
Like.
That cannot be correct. I installed 4.10's in my front diff and did not get anywhere near that. Pretty sure I recall torqueing to 160...
