KJowner's latest activity
-
KJowner replied to the thread 2004 Jeep Liberty Rear End Issue.Check the front lower ball joint and track rod ends, there isn't much else at the back to look at! -
KJowner replied to the thread 2004 Jeep Liberty Rear End Issue.That's strange, you have done the usual causes of rear end steering. Was there no improvement at all with replacement lower arms? Try...
-
KJowner replied to the thread New to jeep..Try unplugging the tailgate handle, there is a microswitch in there that unlatches the glass, it is known to fail and make the glass pop...
-
KJowner replied to the thread Hello from Italy.Welcome, the 2.8 is a good engine, tough and simple
-
Hi, I'm from Italy, Rieti, I'm just getting to know with my father-in-law's 2.8 CRD. So I'm a real beginner: be understanding with me...
-
My 2002 KJ Limited (3.7) is lifted 2". I needed two new tires, and ordered 235/70/16 KO2's to match the two good ones. The next day, the...
-
KJowner replied to the thread 235/70/16 Front + 265/75/16 Rear?.They aren't massively different in size & in 4x2 it shouldn't make any difference but I wouldn't use 4x4 until you have a matched set...
-
-
KJowner replied to the thread New to jeep..Traction control light is probably an ABS sensor or wiring fault, a good code reader will narrow it down.
-
Take a look at the hinges… IIRC they are adjustable for that purpose. One side may have slipped putting it out of alignment.
-
Sometimes the latch doesn't release when manually opened. There's a little electric switch behind the handle that releases the glass...
-
KJowner replied to the thread Broken sway bar link bolt.All that joy from one bolt LOL I'm a fanatical copperslip user, I only ever struggle once!
-
Well done! Much more patience that I have these days!
-
Reporting in… I broke it again!!! Here are the two nuts I was using as jam nuts. Well that didn’t work. Well it worked a little. I...
-
Check the oil sending unit, it is located right above the oil filter. You can also check the oil fill/PCV assy. A long shot is a...
-
KJowner reacted to roger d's post in the thread 2002 Jeep Liberty coolant bleeding nut rusted shut with
Like.
I bled mine a couple days ago. The coolant bleeder screw, OEM Part Numbr 6034331, was put on too tight. The torque is very low; 4 lbs...
