u2slow's latest activity

  • u2slow
    Watch if the rack moves on the bushing when you steer. That's how I diagnosed mine. The driver side usually fails first because it...
  • u2slow
    06-07 seem to all have ABS and traction control. This might be why some lockers aren't considered compatible. I like '05. First year...
  • u2slow
    Took a trip up and down the coq this past weekend for some ice fishing. When you are racing to get there as the sun is getting up, it's...
  • u2slow
    I reckon the NV1500 trans is for the 4cyl. I suspect the bellhousing pattern is different for 4cyl and V6. The NSG370 6spd took over for...
  • u2slow
    Have not had any bearing issues... up to 309,000km now. Regular oil changes with basic 5w30. What i do know about the 3.7/4.7 engines...
  • u2slow
    u2slow replied to the thread Selec trac swap.
    I swapped to the np242 also. Tcase was from an 03 or 04 auto and fit our 6spd just fine. Driveshafts were the same length. Due to dust...
  • u2slow
    The hell with that OEM stuff - been using Prestone since the 60's - Zero problems. Check this out...
  • u2slow
    u2slow replied to the thread 02 Liberty Rear axle swap.
    I'm saying I have sensor in the diff for vehicle speed. I do not have ABS sensors at any wheels. Not sure about prop valve and cables...
  • u2slow
    u2slow reacted to 65Corvair's post in the thread lockers with Like Like.
    The covers are different. In the picture is a regular Dana 30 Lube Locker gasket on a Liberty Dana 30A Housing.
  • u2slow
    u2slow replied to the thread 02 Liberty Rear axle swap.
    ABS is not required for discs. Our '05 does not have it. You'll want to check if the older speed sensor can still be fitted to the top...
  • u2slow
    Interesting. I don't have a fancy lift going on, but it's the original lower balljoints still at 309,000km. It's a Teraflex...
  • u2slow
    u2slow replied to the thread Escaped Rocker Arms..
    The lash adjusters are a common one. Several youtube vids on them. Cheap and easy job really. However, I thought at first I had this...
  • u2slow
    u2slow replied to the thread lockers.
    It's not the same part #. There is a vent, and i have reason to believe it is shallower. Whomever is buying a locker with the actuator...
  • u2slow
    u2slow replied to the thread lockers.
    Agreed. Carrier is the same. The cover is what I'm talking about possibly being different.
  • u2slow
    u2slow reacted to NewKJMudder's post in the thread lockers with Like Like.
    Have you seen the Powertrax lockers, from what I read they work great for mud or crawling. I believe you do not have to regear it
Top