Power Steering Fluid

breeadamsyo · Aug 21, 2024

I’m replacing my entire power steering system, and came here to see what kind of power steering fluid i should be putting in it. 2003 Liberty Sport 3.7l (42RLE trans), manual says MS-5931. Has anyone had any experience with using atf+4 instead or luck somehow finding mopar ms-5931 fluid? mopar dealerships near me haven’t been much help, thanks!

LibertyTC · Aug 21, 2024

Are you having to replace the whole rack & pinion, pump, return pressure lines etc?
Probably ATF+4 would be the best option. After 2003 ATF+4 was used in the KJ's as the standard.

breeadamsyo · Aug 21, 2024

LibertyTC said:
Are you having to replace the whole rack & pinion, pump, return pressure lines etc?
Probably ATF+4 would be the best option. After 2003 ATF+4 was used in the KJ's as the standard.

I’m replacing all of it! i got muddy water in the power steering reservoir & contaminated the entire system. the dealerships i called specifically said not to use atf+4, the other said to use mopar power steering fluid 4 - is there truly a difference?

ltd02 · Aug 21, 2024

I'd just go with the ATF+4. I had an 02 with the factory ps fluid. The PO topped off with ATF+4 and it whined when cold. Seemed to function fine but I flushed the system and replaced with ATF+4 and it was much better after that.

seafish · Aug 22, 2024

ATF+4 and know that any brand of ATF+4 has to meet Mopar specs by licensing, which means it is all the same.

breeadamsyo · Aug 23, 2024

ltd02 said:
I'd just go with the ATF+4. I had an 02 with the factory ps fluid. The PO topped off with ATF+4 and it whined when cold. Seemed to function fine but I flushed the system and replaced with ATF+4 and it was much better after that.

mine was also whining first start up in the morning, so atf+4 is the way i’ll go! thanks!

Yetiboy01 · Aug 27, 2024

breeadamsyo said:
I’m replacing my entire power steering system, and came here to see what kind of power steering fluid i should be putting in it. 2003 Liberty Sport 3.7l (42RLE trans), manual says MS-5931. Has anyone had any experience with using atf+4 instead or luck somehow finding mopar ms-5931 fluid? mopar dealerships near me haven’t been much help, thanks!

From what I have read there is a TSB that states you can use ATF+4 in a new system fill but not for topping up otherwise you will end up with seal leakage, if you want to stick with ms-5931 Valvoline make an equivalent

Power Steering Fluid

breeadamsyo

New Member

LibertyTC

Well-Known Member

breeadamsyo

New Member

ltd02

Comfortably numb

seafish

Full Access Member

breeadamsyo

New Member

Yetiboy01

New Member

Similar threads

Random media

Latest posts

Members online