Need help identifying these control arms so i can refurbish them and replace the ball joints.
- Thread starter dolly95
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
duderz7
Full Access Member
Likely an earlier version of jba, send them an email to see if they can help you out. They're very customer service oriented.
Gman4q2
New Member
I'm not sure if their new ball joint fits the old style but if I remember correctly the old style was made with a 2000 escalade ball joint.
trailpack
New Member
- Joined
- Aug 30, 2024
- Messages
- 10
- Reaction score
- 2
If all else fails, a machine shop might be able to help you out.
Look like current production. They use 1-ton chevy joints
Moog K-6292
Shankster
Full Access Member
They look just like RRO control arms too which also use the Moog K-6292 ball joint. Bottom line, you're probably safe going with Moog K-6292. If in doubt you could take one of the ball joints to your local Auto parts store and compare them alongside the Moogs if they have them in stock. My RRO arm on the passenger side was rubbing on the spring under some circumstances - I took a grinder to the protruding part of the ball joint - no more rubbing.
