03 Liberty 3.7 Transmission Line Pressure Sensor Location - at a loss

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

kgjl2006

New Member
Joined
Jun 13, 2024
Messages
3
Reaction score
0
Hey all, I’ve been looking for the line pressure sensor/transmission fluid pressure sensor on my parents’ 03 Liberty 3.7 for quite some time and am at a loss for its location. I looked at a few service manuals which indicated it was on the rear passenger side of the transmission just above the fluid pan, but i looked around the entire pan and only found the speed sensors. For context, its throwing a 841 code.
Does anyone know where it could be?
 

ikuo78

Full Access Member
Joined
Mar 13, 2024
Messages
193
Reaction score
210
Location
Japan
Is this it?
For 42, the pressure switch is attached to the valve body.
There is an exposed upward facing connector on the right side of the transmission, but it cannot be replaced from the outside.
You must be registered for see images attach
 

kgjl2006

New Member
Joined
Jun 13, 2024
Messages
3
Reaction score
0
Is this it?
For 42, the pressure switch is attached to the valve body.
There is an exposed upward facing connector on the right side of the transmission, but it cannot be replaced from the outside.
You must be registered for see images attach
Sorry for the delayed response, i had to go count the pan bolts. It should be the 42, but the sensor i have has a bolt hole so i dont know if it would fit there. Could also be the wrong part though. Here’s a pic of the new sensor. Thanks for the help so far!
 

Attachments

  • image.jpg
    image.jpg
    273.9 KB · Views: 3

kgjl2006

New Member
Joined
Jun 13, 2024
Messages
3
Reaction score
0
That looks like the one for the 45RFE.
Gotcha, I’m gonna try changing the fluid and filter but if that doesn’t help, I’ll move forward with pulling the valve body. Thanks for all the help, i appreciate it!
 
Top